We – EPG Group the biggest Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Great attention has been paid on environmental protection and energy saving. Standard There is a technical center of province level, EPG academician working station, experiment station for EPG post doctors, and national 863 program set up in EPG group. With these platforms and strong technical ability, the more than 400 technicians have developed all variety of special high precise and high strength products, conducted mold programs for key components in the car and national industry revitalizing program, resulting more than 5000 developed over, among which 33 items are autonomous patent technology with 4 patent approved .roller chain is available with pitches from 1/2 to 3 inches. Chain numbers are determined by multiplying the pitch by 80 (a 1/2 inch pitch chain would be a No. 40 chain). A hyphenated suffix indicates multiple strands. Roller Chain ANSI Standard • British Standard • Heavy-Duty • Extreme-Duty • Super Heavy Series • Cottered or Riveted • Multiple Strand • Stainless Steel • Nickel Plated • Dacroclad™ • Extended Pitch (Including Large Roller) • 81X, 81XH, 81XHH • Hollow Pin • Agricultural (CA550, CA620, etc.) • Citrus Chain G80 load chain featrues:
1.Nominal size:Nominal diameter of the round section steel wire or bar from which the chain is made.
2.Material diameter:Diameter of the material in the chain link as measured.
3.Weld diameter:Diameter at the weld as measured.
4.Length dimensionally affected by welding:Length on either side of the center of the link, affected by welding.
5.Pitch:Internal length of a link as measured.
6. EPT proof force(MPF) of chain:Force to which during manufacture the whole of the chain is subjected.
7.Breaking force( BF):Maximum force which the chain withstands during the course of a static tensile te EPT to destruction.
8.Working load limit (WLL) of chain:Maximum mass which the chain hanging vertically is authorized to sustain in general lifting service.
9.Total ultimate elongation (A):Total extension at the point of fracture of the chain expressed as a percentage of the internal length of the te EPT sample.
EPT Hot Sale 3×9 5×15 6x18mm G80 Hoi EPT Chain for Lifting
size dxp(mm) | width | Approx Weight(kg/m) | Working LoadLimit(t) |
Test Load(KN) | Breaking Load min. FN |
|
inside min.w1 | outside max. w3 | |||||
3×9 | 3.8 | 10.7 | 0.21 | 0.28 | 7.1 | 11.3 |
4×12 | 5 | 14.3 | 0.35 | 0.5 | 12.6 | 20.1 |
5×15 | 6.3 | 17.9 | 0.54 | 0.8 | 19.6 | 31.4 |
6×18 | 7.5 | 21 | 0.79 | 1.1 | 12.7 | 45.2 |
6.3×19 | 7.9 | 22.6 | 0.86 | 1.25 | 31.2 | 49.9 |
7×21 | 9 | 24.5 | 1.07 | 1.5 | 37 | 61.6 |
8×24 | 10 | 28 | 1.38 | 2 | 48 | 80.4 |
9×27 | 11.3 | 32.2 | 1.76 | 2.5 | 63.6 | 102 |
10×30 | 12.5 | 35 | 2.2 | 3.2 | 76 | 125 |
11.2×33.6 | 14 | 40.1 | 2.71 | 4 | 98.5 | 158 |
11×43 | 12.6 | 36.5 | 2.33 | 3.8 | 92 | 154 |
12×36 | 15 | 42 | 3.1 | 4.6 | 109 | 181 |
12.5×38 | 15.5 | 42.2 | 3.3 | 4.9 | 117 | 196 |
13×39 | 16.3 | 46 | 3.8 | 5 | 128 | 214 |
14×42 | 18 | 49 | 4.13 | 6.3 | 150 | 250 |
14×50 | 17 | 48 | 4 | 6.3 | 150 | 250 |
15×46 | 20 | 52 | 5.17 | 7 | 168 | 280 |
16×48 | 20 | 56 | 5.63 | 8 | 192 | 320 |
16×49 | 24.5 | 59.5 | 5.71 | 8 | 192 | 320 |
16×64 | 23.9 | 58.9 | 5.11 | 8 | 192 | 320 |
18×54 | 23 | 63 | 6.85 | 10 | 246 | 410 |
18×54 | 21 | 60 | 6.6 | 10 | 246 | 410 |
19×57 | 23.7 | 63.2 | 7.7 | 11.3 | 270 | 450 |
20×60 | 25 | 70 | 8.6 | 12.5 | 300 | 500 |
22×65 | 28 | 74.2 | 10.7 | 15.3 | 366 | 610 |
22×66 | 28 | 77 | 10.2 | 15.3 | 366 | 610 |
22×86 | 26 | 74 | 9.5 | 15.3 | 366 | 610 |
24×72 | 32 | 82 | 12.78 | 18 | 432 | 720 |
24×86 | 28 | 79 | 11.6 | 18 | 432 | 720 |
26×78 | 35 | 91 | 14.87 | 21.3 | 510 | 720 |
26×92 | 30 | 86 | 13.7 | 21.3 | 510 | 850 |
Payment
Payment term | L/C | l/c amount above 40.000 usd,we can accept L/C at sight | |
T/T |
EXW | 30% T/T in advance,paid the balance before shipment |
|
FOB | |||
CIF | 30% T/T in advance,paid the balance again EPT copy of B/L |
||
cfr(c&f) | |||
paypal | amount lower than 4000usd |
||
west |
Delivery time | 15~35days after receiving payment for one container |
We welcome use trade assurance,you`ll enjoy: 100% product quality protection 100% on-time shipment protection 100% payment protection for your covered amount |
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.