Product Description
Common faults of the automobile CV JOINTS/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT:
1. Abnormal noise
When turning left and right, there is a “click” sound of metal knocking on 1 side of the wheel. The noise disappears when driving in a straight line. This is a typical failure phenomenon of the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT.
2. Stuck
When the vehicle is running at high speed, the wheels resonate. It belongs to the lack of lubrication inside the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT, and the vibration caused by wear and tear during operation.
3. Fracture
After the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT is worn to a certain extent, the internal bracket is broken, and the transmission function will be lost, so that the vehicle cannot move after the gear is loose and the clutch is released.
The composition of the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT universal joint:
The composition of the CV JOINT /CARDAN SHAFT/AXLE SHAFT/HALF SHAFT: 1. Star sleeve (inner raceway); 2. Spherical shell (outer raceway); 3. Steel ball; 4. Clamp; 5.rubber Boot; 6. bracket. CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT constant velocity universal joints can be divided into axially non-telescopic (fixed) CV JOINT universal joints and telescopic CV JOINTS universal joints according to whether the axial direction of the CV JOINT universal joint can move.
Structurally, the internal splines on the inner surface of the star sleeve of the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT universal joint are connected with the transmission shaft. Its outer surface has 6 arc grooves as the inner raceway of the steel ball, and the outer raceway as the inner surface of the spherical shell. Each of the 6 raceways assembled by the star sleeve and the spherical shell is equipped with a steel ball, and the 6 steel balls are kept on the same level by the cage (CV JOINT). The power is transmitted from the transmission shaft through the steel ball and the spherical shell.
The structural feature of the telescopic CV JOINT universal joint is that the inner wall of the cylindrical shell and the outer surface of the star sleeve adopt cylindrical straight grooves, and the raceway produced by the combination of the 2 adopts steel balls. At the same time, steel balls are also installed in the holes of the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT. The inner hole of the star sleeve is connected with the input shaft by a spline. This configuration allows movement of the star sleeve in an axial direction corresponding to that of a simple housing.
Materials and technical requirements for main components of HDAG CV JOINTS/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT universal joints:
1. CHINAMFG shell/cylindrical shell: 55#, CF53
1) High-frequency quenching of spline parts to HRC52-58
2) Intermediate frequency quenching of ball hole and ball raceway to HRC58-62
3) Dimensional accuracy and shape tolerance should meet the drawing requirements
4) There should be no cracks in the flaw detection
2. Star sleeve/cage/triple pin: 20CrMnTi
1) Carburizing and quenching – carburizing layer depth 0.7-1.2mm, quenching hardness HRC58-62
2) Dimensional accuracy and shape tolerance should meet the drawing requirements
3) There should be no cracks in the flaw detection
3. Half shaft: 40Cr
1) Carburizing and quenching – carburizing layer depth 0.7-1.2mm, quenching hardness HRC52-58
2) Dimensional accuracy and shape error meet the drawing requirements
3) There should be no cracks in the flaw detection
4. Dust cover: Neoprene CR, thermoplastic polyester elastomer TPEE
5. Clamp: stainless steel 1Cr18Ni9Ti or galvanized steel
Product description
CHINAMFG OEM 2 2 2 2 2 AUTO CV JOINT CARDAN SHAFT factory for lada BA3 UAZ GAZ VAZ
| Item Name | Auto or car CV JOINT,Universal Joint,CV JOINT INNER OUTER, DRIVE SHAFT, DRIVESHAFT,CV AXLE, JOINT SHAFT ASSEMBLY,CV AXLE JOINT SHAFT, HALF SHAFT, WHEEL BEARING HUB, WHEEL HUB BEARING, WHEEL BEARING | |||||
| OEM/REF NO. | 2 2 2 2 2 | |||||
| Car Model | For CARDAN lada BA3 UAZ GAZ VAZ | |||||
| POSITION | RH/LH/Right/ Left/ Front/Rear | |||||
| MOQ | 1 1 | , 2- | 1 | |||
| 2 | EX-BK1102OT 215215710 051 | EX-BK1102IN2 215 | ||||
| 96243578 | EX-BK1102OT-3T 215215710 051 | 215914750 | 2 | |||
| 21591475 82-20-103 | 32-1116J-k | 82-20-103 | ||||
| 32-1116J-k 2 | 2 2 | SK96257804BK 35711 | 82-20-103 | |||
| 96391553 93743422 | CV35571 96220402 | EX-BK43578 SK96257804BK | 49541-24 | -01 | -01 | -01 |
| 2 2 | 3-01 | -01 |
Reference our cv joint packing way,we have full experience to supply different brands all over the world:
Our HDAG CV JOINTS universal joint Drive shafts machining and production workshops:
Our HDAG CV JOINTS universal joint Drive shafts assemble line:
Our semi finished CV JOINT universal joint Drive shaft in stock before packing and shipment:
HDAG CV JOINTS universal joint Drive shafts pull push force and tensile testing, assemble Testing, full size tolerance testing:
I. We only do OEM, produce high precisional Auto CV JOINT,Universal Joint,Car CV JOINT INNER OUTER, DRIVE SHAFT, DRIVESHAFT,CV AXLE, JOINT SHAFT ASSEMBLY,CV AXLE JOINT SHAFT, HALF SHAFT, WHEEL BEARING HUB, WHEEL HUB BEARING, WHEEL BEARING, different with other factories
II.Quality guarantee: We promise to all of our old and new customers: ONE year guarantee or 50,E 1H0498099A/1H57111/357498099EX/357498099EV/357498099E/1J57111D
CHINAMFG :
CHINAMFG :
CHINAMFG :
CHINAMFG : 4342
CHINAMFG : 4342
CHINAMFG : 4342R20
CHINAMFG : 4346R30
CHINAMFG : 4346S50
CHINAMFG : 4346
CHINAMFG : 4347S60
CHINAMFG : 4347U90
CHINAMFG :
CHINAMFG :
CHINAMFG : 434708Z033
CHINAMFG : 434708Z037
CHINAMFG : 391571JJ10
CHINAMFG : 39157117JJ10
CHINAMFG : 3910110JJ10
CHINAMFG : 391Y10
CHINAMFG : 391M570
CHINAMFG : 391N215
CHINAMFG : 391571M311
CHINAMFG : 391571M915
CHINAMFG : 3910140Y10
CHINAMFG : 391014M570
CHINAMFG : 391014M575
CHINAMFG : 391014M771
CHINAMFG : 3910163Y10
CHINAMFG : 391016N215
391012Y175
392112Y070
391J210
CHINAMFG : 391J171
CHINAMFG : 391N275
CHINAMFG : 391J071
CHINAMFG : 391J915
CHINAMFG : 391E478
CHINAMFG : 391012J215
CHINAMFG : 391014N175
CHINAMFG : 391014N177
CHINAMFG : 391014N275
CHINAMFG : 391015J571
CHINAMFG : 391016J571
CHINAMFG : 391016J071
CHINAMFG : 391016J076
CHINAMFG : 391016J915
CHINAMFG : 39101AE415
CHINAMFG : 39101AU415
CHINAMFG : 39101AU416
CHINAMFG : 39101AW110
CHINAMFG : 39101CX116
CHINAMFG : 39101WF715
CHINAMFG : 39101WF716
3921185E
CHINAMFG : 4347Z035
CHINAMFG : 434708Z039
191498103A
191498103C
191498103CV
191498103CX
191498104C
321498103D
357498103
357498103A
357498103V
357498103X
357498350X
191498103
1K0498103
VAG :
,96396134,512395
CHINAMFG : 391V70A
CHINAMFG : 391013U505
CHINAMFG : 391014V01C
CHINAMFG : 391014V51A
CHINAMFG : 391014V70A
CHINAMFG : 392113U
96348790
CHINAMFG : 8111304
CHINAMFG : 86011
CHINAMFG : 9122833
CHINAMFG : 9163595
MAZDA : G571550X
MAZDA : G571560X
MAZDA : G565715
OPEL : 374
VAUXHALL : 571
391
MAZDA : MD1922510
MAZDA : MD1922510A
MAZDA : MD192550X
MAZDA : MD257160XB
33
A
OPEL : 374048
OPEL : 374067
OPEL : 37408
OPEL : 374118
OPEL : 374148
OPEL : 374195
OPEL : 90125876
OPEL : 90157212
OPEL : 95718734
OPEL : 9317340
OPEL : 93173430
SAAB : 4242319
A1683601872
CHINAMFG : 391KD0A
CHINAMFG : 391019Y015
CHINAMFG : 39101CNY015
CHINAMFG : 39211CN,7701349689,7701349839,7701349873
,7701351948,7701352571,7701352571
,7701498918,7701498919,7701498921
3910173N10
HONDA : 44305S04J60
HONDA : 44305S0A960
HONDA : 44305S0AN60
HONDA : 44305S2H571
HONDA : 44305S2H050
HONDA : 44305S2H950
HONDA : 44305S2H951
HONDA : 44305S2HN50
HONDA : 44305S5AJ50
HONDA : 44305S5AJ60
HONDA : 44305S5AJ61
HONDA : 44305S5AJ62
HONDA : 44305S5C950
HONDA : 44305S5CN50
HONDA : 44305S5CN51
HONDA : 44305S7B950
HONDA : 44305S7C950
HONDA : 44305SOA960
HONDA : 44305SOAN60
HONDA : 44306S0A960
HONDA : 44306S0AN60
HONDA : 44306S2H571
HONDA : 44306S2H950
HONDA : 44306S2H951
HONDA : 44306S5AJ51
HONDA : 44306S5AJ61
HONDA : 44306S5AJ62
HONDA : 44306S5C951
HONDA : 44306S5C952
HONDA : 44306S7B950
HONDA : 44306S7C950
HONDA : 44306SOA960
HONDA : 44306SOAN60
326582
FG02-25-500E
FG02-25-600D
FG02-25-600E
44305-SA2-960
39100ED00A
39101ED00A
39101ED005
44571-SH3-J01,44306-SB2-984
39211-CN000
CHINAMFG : 0K558-25-60X
3272.S5
39211-AY125
39101-AX005
39100-AX005
39101-AX000
MAZDA : M 0571 1510A
MAZDA : M 0571 1500C
MAZDA : M 0571 1500D
MAZDA : M 0571 1600A
MAZDA : M 0571 1600B
MAZDA : MD0925500A
MAZDA : MD0925600A
MAZDA : G064-25-600
MAZDA : G564-25-500A
MAZDA : G564-25-600A
MAZDA : G564-25-60X
MAZDA : GR01-25-500
MAZDA : GR01-25-50X
MAZDA : GR01-25-600
MAZDA : GR01-25-60X
MAZDA : GU01-25-500
MAZDA : GU01-25-50XA
MAZDA : GU01-25-50XC
MAZDA : GU01-25-600
MAZDA : GU01-25-60XA
MAZDA : GU01-25-60XD
HONDA : 44014-SNG-000
HONDA : 44305-SDC-A00
HONDA : 44305-SEA-000
HONDA : 44305-SNG-571
HONDA : 44306-SDC-A01
HONDA : 44306-SDE-T00
HONDA : 44306-SEA-000
HONDA : 44306-SNG-571
CHINAMFG : 39100JD24B
CHINAMFG : 39100JD52B
CHINAMFG : 39101JD24B
CHINAMFG : 39101JD52B
CHINAMFG : 39211JA00A
CHINAMFG : 39211JD22B
CHINAMFG : C9211JA00A
CHINAMFG : C9211JD22B
CHINAMFG : C92AAJA00A
CHINAMFG : C92AAJD22B
CHINAMFG : C9B11JA00A
CHINAMFG : C9BAAJA00A
MAZDA : FA8571500A
MAZDA : FA8571600B
MAZDA : FA8125600B
MAZDA : FA8225500A
MAZDA : FD8571500B
MAZDA : FD8571600A
MAZDA : FP0125500C
3272-HY
3272-KW
3273-HQ
3273-KJ
CHINAMFG : 39100-ED105
CHINAMFG : 39100-ED305
CHINAMFG : 39100-ED805
CHINAMFG : 39101-ED105
CHINAMFG : 39101-ED305
CHINAMFG : 39101-ED805
CHINAMFG : 39211-ED100
CHINAMFG : C9211-EL10A
CHINAMFG : KK38825600
CHINAMFG : 49500-25302
CHINAMFG : 49500-25310
CHINAMFG : 49500-25311
CHINAMFG : 49500-25312
CHINAMFG : 49500-25301
CHINAMFG : 49500-25302
CHINAMFG : 49500-25310
CHINAMFG : 49500-25311
CHINAMFG : 49500-25312
LAND ROVER : STC3046
40011-M5626
39100-M7270
39101-M7270
39113-M7275
39112-M7225
LAND ROVER : TDJ00571
CHINAMFG : 49500-25400
CHINAMFG : 49500-25200
CHINAMFG : 49500-25400
LAND ROVER : TDB500110
LAND ROVER : TDJ500030
39101-CA100
39211-CA100
39100-CA100
HONDA : 44305S74E01
HONDA : 44305S74E51
ROVER : GCV1123
ROVER : TFB000070
39211-AY125
39101-AX005
39100-AX005
39101-AX000
CITROEN : 3272TH
CITROEN : 3272WX
CITROEN : 3273QQ
CITROEN : 3273TT
CITROEN : 3273XR
DS : 3272QF
DS : 3272TH
DS : 3273QQ
DS : 3273TT
PEUGEOT : 3272QF
PEUGEOT : 3272TH
PEUGEOT : 3272WX
PEUGEOT : 3273QQ
PEUGEOT : 3273TT
PEUGEOT : 3273XR
39211-CG571
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Three Years |
|---|---|
| Condition: | New |
| Color: | OEM Standard |
| Certification: | CE, ISO, ISO/Ts16949 |
| Type: | Universal Joint |
| Application Brand: | Nissan, Iveco, Toyota, Ford, Lada Mitsubishi FIAT Opel Peugeot Renault Citroen |
| Customization: |
Available
| Customized Request |
|---|
What factors should be considered when selecting the right cardan shaft for an application?
When selecting a cardan shaft for a specific application, several crucial factors need to be considered to ensure optimal performance and longevity. The following factors should be taken into account during the selection process:
1. Torque Requirements:
– One of the primary considerations is the torque requirements of the application. The cardan shaft should be capable of transmitting the required torque without exceeding its rated capacity. It is essential to determine the maximum torque that the shaft will experience during operation and select a cardan shaft that can handle that torque while providing an appropriate safety margin.
2. Speed and RPM:
– The rotational speed or RPM (revolutions per minute) of the application is another critical factor. Cardan shafts have specific rotational speed limits, and exceeding these limits can lead to premature wear, vibration, and failure. It is crucial to select a cardan shaft that is rated for the speed requirements of the application to ensure reliable and smooth operation.
3. Angle of Misalignment:
– The angle of misalignment between the driving and driven components should be considered. Cardan shafts can accommodate angular misalignment up to a certain degree, typically specified by the manufacturer. It is important to select a cardan shaft that can handle the anticipated misalignment angle to ensure proper power transmission and prevent excessive wear or binding.
4. Operating Conditions:
– The operating conditions of the application play a vital role in cardan shaft selection. Factors such as temperature, humidity, presence of corrosive agents, and exposure to vibration or shock need to be considered. It is crucial to select a cardan shaft that is designed to withstand the specific operating conditions to ensure durability and reliability.
5. Length and Size:
– The length and size of the cardan shaft should be chosen appropriately for the application. The length of the shaft affects its ability to absorb vibrations and accommodate misalignments. It is important to consider the available space and the required length to ensure proper fitment and functionality. Additionally, the size of the cardan shaft should be selected based on the load requirements and the available torque capacity.
6. Maintenance and Serviceability:
– Consideration should be given to the ease of maintenance and serviceability of the cardan shaft. Some applications may require regular inspection, lubrication, or replacement of certain components. It is beneficial to select a cardan shaft that allows convenient access for maintenance and incorporates features such as grease fittings or easily replaceable universal joints.
7. Cost and Budget:
– Finally, the cost and budget constraints should be taken into account. Different cardan shaft manufacturers and suppliers may offer varying prices for their products. It is important to balance the desired quality, performance, and durability of the cardan shaft with the available budget.
By carefully considering these factors, engineers and designers can select the right cardan shaft for the application, ensuring optimal performance, longevity, and reliability. Collaboration with cardan shaft manufacturers and suppliers can also provide valuable insights and assistance in making the appropriate selection based on the specific requirements of the application.
How do cardan shafts enhance the performance of trucks and heavy-duty vehicles?
Cardan shafts play a significant role in enhancing the performance of trucks and heavy-duty vehicles. These vehicles often operate under demanding conditions, requiring robust and efficient power transmission systems. Here’s how cardan shafts contribute to the performance of trucks and heavy-duty vehicles:
1. Torque Transmission:
– Cardan shafts enable the efficient transmission of torque from the engine or transmission to the drivetrain and wheels of trucks and heavy-duty vehicles. They can handle high torque loads, ensuring that power is effectively transferred to propel the vehicle forward. This efficient torque transmission enhances acceleration, towing capacity, and overall performance.
2. Power Distribution:
– Trucks and heavy-duty vehicles often have multiple axles or wheels. Cardan shafts distribute power to each axle or wheel, ensuring balanced power delivery. This helps improve traction, stability, and control, especially when carrying heavy loads or operating on challenging terrains. By optimizing power distribution, cardan shafts enhance the vehicle’s performance and handling characteristics.
3. Flexibility and Misalignment Compensation:
– Cardan shafts are designed to accommodate misalignment between the engine, transmission, and drivetrain components. They can handle angular misalignment, parallel offset, and axial displacement. This flexibility allows for smooth power transmission even when the components are not perfectly aligned, reducing stress on the drivetrain and improving performance. It also helps absorb vibrations and shocks, enhancing driver comfort and reducing wear on other vehicle components.
4. Durability and Reliability:
– Heavy-duty vehicles operate in rugged and demanding conditions, such as construction sites, mining operations, or long-haul transportation. Cardan shafts are built to withstand these harsh environments, providing durability and reliability. They are designed using robust materials and undergo rigorous testing to ensure they can handle the high torque, heavy loads, and continuous operation that trucks and heavy-duty vehicles require. This reliability minimizes downtime and maintenance, improving overall vehicle performance.
5. Powertrain Efficiency:
– Cardan shafts help optimize powertrain efficiency in trucks and heavy-duty vehicles. By efficiently transmitting torque and minimizing power loss during power transfer, they contribute to improved fuel economy and reduced energy consumption. This increased efficiency translates to cost savings and reduced environmental impact.
6. Weight Reduction:
– Cardan shafts offer weight reduction benefits for trucks and heavy-duty vehicles. The use of lightweight materials and optimized designs helps reduce the overall weight of the propulsion system. Reduced weight improves fuel efficiency, increases payload capacity, and enhances vehicle maneuverability. Cardan shafts’ compactness and space-saving design also allow for more efficient packaging of the drivetrain components.
7. Adaptability to Various Configurations:
– Trucks and heavy-duty vehicles come in different configurations, such as rear-wheel drive (RWD), front-wheel drive (FWD), or all-wheel drive (AWD). Cardan shafts can be tailored to suit these various drivetrain setups, providing the necessary torque transmission and power distribution for each configuration. This adaptability allows manufacturers to optimize vehicle performance based on specific application requirements.
Overall, cardan shafts enhance the performance of trucks and heavy-duty vehicles by enabling efficient torque transmission, balancing power distribution, compensating for misalignment, providing durability and reliability, optimizing powertrain efficiency, reducing weight, and adapting to various drivetrain configurations. Their role in improving acceleration, towing capacity, traction, and fuel economy contributes to the overall performance and success of these vehicles in demanding environments.
How do cardan shafts contribute to power transmission and motion in various applications?
Cardan shafts, also known as propeller shafts or drive shafts, play a significant role in power transmission and motion in various applications. They are widely used in automotive, industrial, and marine sectors to transfer torque and rotational power between non-aligned components. Cardan shafts offer several benefits that contribute to efficient power transmission and enable smooth motion in different applications. Here’s a detailed look at how cardan shafts contribute to power transmission and motion:
1. Torque Transmission:
– Cardan shafts are designed to transmit torque from a driving source, such as an engine or motor, to a driven component, such as wheels, propellers, or machinery. They can handle high torque loads and transfer power over long distances. By connecting the driving and driven components, cardan shafts ensure the efficient transmission of rotational power, enabling the motion of vehicles, machinery, or equipment.
2. Angular Misalignment Compensation:
– One of the key advantages of cardan shafts is their ability to accommodate angular misalignment between the driving and driven components. The universal joints present in cardan shafts allow for flexibility and articulation, compensating for variations in the relative positions of the components. This flexibility is crucial in applications where the driving and driven components may not be perfectly aligned, such as vehicles with suspension movement or machinery with adjustable parts. The cardan shaft’s universal joints enable the transmission of torque even when there are angular deviations, ensuring smooth power transfer.
3. Axial Misalignment Compensation:
– In addition to angular misalignment compensation, cardan shafts can also accommodate axial misalignment between the driving and driven components. Axial misalignment refers to the displacement along the axis of the shafts. The design of cardan shafts with telescopic sections or sliding splines allows for axial movement, enabling the shaft to adjust its length to compensate for variations in the distance between the components. This feature is particularly useful in applications where the distance between the driving and driven components can change, such as vehicles with adjustable wheelbases or machinery with variable attachment points.
4. Vibration Damping:
– Cardan shafts contribute to vibration damping in various applications. The flexibility provided by the universal joints helps absorb and dampen vibrations generated during operation. By allowing slight angular deflection and accommodating misalignment, cardan shafts help reduce the transmission of vibrations from the driving source to the driven component. This vibration damping feature improves the overall smoothness of operation, enhances ride comfort in vehicles, and reduces stress on machinery.
5. Balancing:
– To ensure smooth and efficient operation, cardan shafts are carefully balanced. Even minor imbalances in rotational components can result in vibration, noise, and reduced performance. Balancing the cardan shaft minimizes these issues by redistributing mass along the shaft, eliminating or minimizing vibrations caused by centrifugal forces. Proper balancing improves the overall stability, reduces wear on bearings and other components, and extends the lifespan of the shaft and associated equipment.
6. Safety Features:
– Cardan shafts often incorporate safety features to protect against mechanical failures. For example, some cardan shafts have guards or shielding to prevent contact with rotating components, reducing the risk of accidents or injuries. In applications where excessive forces or torques can occur, cardan shafts may include safety mechanisms such as shear pins or torque limiters. These features are designed to protect the shaft and other components from damage by shearing or disengaging in case of overload or excessive torque.
7. Versatility in Applications:
– Cardan shafts offer versatility in their applications. They are widely used in various industries, including automotive, agriculture, mining, marine, and industrial sectors. In automotive applications, cardan shafts transmit power from the engine to the wheels, enabling vehicle propulsion. In industrial machinery, they transfer power between motors and driven components such as conveyors, pumps, or generators. In marine applications, cardan shafts transmit power from the engine to propellers, enabling ship propulsion. The versatility of cardan shafts makes them suitable for a wide range of power transmission needs in different environments.
In summary, cardan shafts are essential components that contribute to efficient power transmission and motion in various applications. Their ability to accommodate angular and axial misalignment, dampen vibrations, balance rotational components, and incorporate safety features enables smooth and reliable operation in vehicles, machinery, and equipment. The versatility of cardan shafts makes them a valuable solution for transmitting torque and rotational power in diverse industries and environments.
editor by CX 2024-05-07