Product Description
Agricultural Farm Tractor Truck Cardan Universal Joint Durable Pto Shaft for Rotary Tiller Shear Bolt Torque Limiter
Power Take Off Shafts for all applications
A power take-off or power takeoff (PTO) is any of several methods for taking power from a power source, such as a running engine, and transmitting it to an application such as an attached implement or separate machines.
Most commonly, it is a splined drive shaft installed on a tractor or truck allowing implements with mating fittings to be powered directly by the engine.
Semi-permanently mounted power take-offs can also be found on industrial and marine engines. These applications typically use a drive shaft and bolted joint to transmit power to a secondary implement or accessory. In the case of a marine application, such shafts may be used to power fire pumps.
We offer high-quality PTO shaft parts and accessories, including clutches, tubes, and yokes for your tractor and implements, including an extensive range of pto driveline. Request our pto shaft products at the best rate possible.
What does a power take off do?
Power take-off (PTO) is a device that transfers an engine’s mechanical power to another piece of equipment. A PTO allows the hosting energy source to transmit power to additional equipment that does not have its own engine or motor. For example, a PTO helps to run a jackhammer using a tractor engine.
What’s the difference between 540 and 1000 PTO?
When a PTO shaft is turning 540, the ratio must be adjusted (geared up or down) to meet the needs of the implement, which is usually higher RPM’s than that. Since 1000 RPM’s is almost double that of 540, there is less “”Gearing Up”” designed in the implement to do the job required.”
If you are looking for a PTO speed reducer visit here
Function | Power transmission |
Use | Tractors and various farm implements |
Place of Origin | HangZhou ,ZHangZhoug, China (Mainland) |
Brand Name | EPT |
Yoke Type | push pin/quick release/collar/double push pin/bolt pins/split pins |
Processing Of Yoke | Forging |
Plastic Cover | YW;BW;YS;BS |
Color | Yellow;black |
Series | T series; L series; S series |
Tube Type | Trianglar/star/lemon |
Processing Of Tube | Cold drawn |
Spline Type | 1 3/8″ Z6; 1 3/8 Z21 ;1 3/4 Z20;1 1/8 Z6; 1 3/4 Z6; |
Related Products
Application:
Company information:
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Material: | Carbon Steel |
---|---|
Load: | Drive Shaft |
Stiffness & Flexibility: | Stiffness / Rigid Axle |
Journal Diameter Dimensional Accuracy: | IT6-IT9 |
Axis Shape: | Straight Shaft |
Shaft Shape: | Real Axis |
Samples: |
US$ 38/Piece
1 Piece(Min.Order) | |
---|
Are there any limitations or disadvantages associated with cardan shaft systems?
While cardan shaft systems offer numerous advantages, they also have some limitations and disadvantages that should be considered. Let’s explore these limitations in detail:
1. Angular Misalignment:
– Cardan shafts are designed to accommodate angular misalignment between the driving and driven components. However, excessive misalignment can lead to increased wear, vibration, and decreased efficiency. If the misalignment exceeds the recommended limits, it can put additional stress on the universal joints and other components, reducing the lifespan of the shaft and potentially causing mechanical failures.
2. Noise and Vibration:
– Cardan shaft systems can introduce noise and vibration into the equipment or vehicle. The universal joints and slip yokes in the shaft assembly can generate vibrations as they rotate, especially at high speeds. These vibrations can contribute to increased noise levels, potentially causing discomfort for passengers or affecting the performance of sensitive equipment. Proper balancing and maintenance of the shaft can help mitigate these effects, but they may still be present to some extent.
3. Maintenance and Lubrication:
– Cardan shaft systems require regular maintenance and lubrication to ensure optimal performance and longevity. The universal joints and slip yokes need to be properly lubricated to minimize friction and wear. If maintenance is neglected, the joints can wear out quickly, leading to increased vibration, noise, and potential failure. Regular inspections and lubrication are necessary to maintain the efficiency and reliability of cardan shaft systems.
4. Limited Flexibility in High-Speed Applications:
– Cardan shafts have limitations when it comes to high-speed applications. At high rotational speeds, the centrifugal forces acting on the rotating components can cause significant stress on the shaft and universal joints. This can result in increased wear, reduced lifespan, and potential failure. In such cases, alternative power transmission systems such as constant-velocity (CV) joints or direct drives may be more suitable.
5. Space and Weight Constraints:
– Cardan shaft systems require sufficient space for installation due to their length and telescopic design. In applications with limited space constraints, it may be challenging to accommodate the full length of the shaft, or modifications may be necessary to ensure proper fit. Additionally, the weight of the shaft can be a consideration, especially in applications where weight reduction is crucial. In such cases, alternative lightweight materials or drive systems may be more appropriate.
6. Cost:
– Cardan shaft systems can be relatively costly compared to other power transmission options. The complexity of their design, the need for customization, and the use of multiple components contribute to higher manufacturing and installation costs. However, it’s important to consider the overall benefits and performance of cardan shaft systems when evaluating their cost-effectiveness for specific applications.
7. Limited Misalignment Compensation:
– While cardan shafts can accommodate angular misalignment, they have limitations when it comes to compensating for other types of misalignment, such as parallel offset or axial displacement. In applications that require significant compensation for these types of misalignment, alternative power transmission systems with more advanced flexibility, such as flexible couplings or CV joints, may be more suitable.
Despite these limitations, cardan shaft systems remain widely used and offer numerous advantages in various applications. By understanding these limitations and considering the specific requirements of the application, engineers can make informed decisions regarding the suitability of cardan shaft systems or explore alternative power transmission options.
Are there any emerging trends in cardan shaft technology, such as lightweight materials?
Yes, there are several emerging trends in cardan shaft technology, including the use of lightweight materials and advancements in design and manufacturing techniques. These trends aim to improve the performance, efficiency, and durability of cardan shafts. Here are some of the notable developments:
1. Lightweight Materials:
– The automotive and manufacturing industries are increasingly exploring the use of lightweight materials in cardan shaft construction. Materials such as aluminum alloys and carbon fiber-reinforced composites offer significant weight reduction compared to traditional steel shafts. The use of lightweight materials helps reduce the overall weight of the vehicle or machinery, leading to improved fuel efficiency, increased payload capacity, and enhanced performance.
2. Advanced Composite Materials:
– Advanced composite materials, such as carbon fiber and fiberglass composites, are being utilized in cardan shafts to achieve a balance between strength, stiffness, and weight reduction. These materials offer high tensile strength, excellent fatigue resistance, and corrosion resistance. By incorporating advanced composites, cardan shafts can achieve reduced weight while maintaining the necessary structural integrity and durability.
3. Enhanced Design and Optimization:
– Advanced computer-aided design (CAD) and simulation techniques are being employed to optimize the design of cardan shafts. Finite element analysis (FEA) and computational fluid dynamics (CFD) simulations allow for better understanding of the structural behavior, stress distribution, and performance characteristics of the shafts. This enables engineers to design more efficient and lightweight cardan shafts that meet specific performance requirements.
4. Additive Manufacturing (3D Printing):
– Additive manufacturing, commonly known as 3D printing, is gaining traction in the production of cardan shafts. This technology allows for complex geometries and customized designs to be manufactured with reduced material waste. Additive manufacturing also enables the integration of lightweight lattice structures, which further enhances weight reduction without compromising strength. The flexibility of 3D printing enables the production of cardan shafts that are tailored to specific applications, optimizing performance and reducing costs.
5. Surface Coatings and Treatments:
– Surface coatings and treatments are being employed to improve the durability, corrosion resistance, and friction characteristics of cardan shafts. Advanced coatings such as ceramic coatings, diamond-like carbon (DLC) coatings, and nanocomposite coatings enhance the surface hardness, reduce friction, and protect against wear and corrosion. These treatments extend the lifespan of cardan shafts and contribute to the overall efficiency and reliability of the power transmission system.
6. Integrated Sensor Technology:
– The integration of sensor technology in cardan shafts is an emerging trend. Sensors can be embedded in the shafts to monitor parameters such as torque, vibration, and temperature. Real-time data from these sensors can be used for condition monitoring, predictive maintenance, and performance optimization. Integrated sensor technology allows for proactive maintenance, reducing downtime and improving the overall operational efficiency of vehicles and machinery.
These emerging trends in cardan shaft technology, including the use of lightweight materials, advanced composites, enhanced design and optimization, additive manufacturing, surface coatings, and integrated sensor technology, are driving advancements in the performance, efficiency, and reliability of cardan shafts. These developments aim to meet the evolving demands of various industries and contribute to more sustainable and high-performing power transmission systems.
What benefits do cardan shafts offer for different types of vehicles and equipment?
Cardan shafts, also known as propeller shafts or drive shafts, offer numerous benefits for different types of vehicles and equipment. Their versatile design and functionality make them an essential component in various applications. Here are the key benefits that cardan shafts provide for different types of vehicles and equipment:
1. Efficient Power Transmission:
– Cardan shafts ensure efficient power transmission from the engine or power source to the wheels or driven components. In vehicles, such as cars, trucks, and buses, cardan shafts transmit torque from the gearbox or transmission to the differential, enabling the wheels to rotate and propel the vehicle forward. In equipment and machinery, cardan shafts transfer rotational power from the power source, such as an engine or motor, to driven components like pumps, conveyors, or generators. By efficiently transmitting power, cardan shafts contribute to the overall performance and productivity of vehicles and equipment.
2. Flexibility and Misalignment Compensation:
– Cardan shafts offer flexibility and the ability to compensate for misalignment between the driving and driven components. This flexibility is crucial in vehicles and equipment where the engine or power source may not be directly aligned with the wheels or driven machinery. Cardan shafts incorporate universal joints at each end, allowing for angular misalignment and accommodating variations in the relative positions of the components. This feature ensures smooth power transmission, reduces stress on the drivetrain, and enhances the overall maneuverability and performance of vehicles and equipment.
3. Adaptability to Variable Configurations:
– Cardan shafts are adaptable to variable configurations and adjustable setups. In vehicles, they can accommodate changes in the wheelbase or suspension system, allowing for different vehicle sizes and configurations. For example, in trucks with multiple axles, cardan shafts can be adjusted to compensate for varying distances between the axles. In equipment and machinery, cardan shafts can be designed with telescopic sections or sliding splines, enabling length adjustment to accommodate changes in the distance between the power source and driven components. This adaptability makes cardan shafts suitable for a wide range of vehicle and equipment configurations.
4. Vibration Damping and Smooth Operation:
– Cardan shafts contribute to vibration damping and enable smooth operation in vehicles and equipment. The universal joints in cardan shafts help absorb and dampen vibrations that may arise from the power source or drivetrain. By allowing slight angular deflection and compensating for misalignment, cardan shafts reduce the transmission of vibrations to the vehicle or equipment, resulting in a smoother and more comfortable ride for passengers or operators. Additionally, the balanced design of cardan shafts minimizes vibration-induced wear and extends the lifespan of associated components.
5. Safety and Protection:
– Cardan shafts incorporate safety features to ensure the protection of both the vehicle or equipment and the operator. For example, in vehicles, cardan shafts often have shielding or guards to prevent contact with rotating components, reducing the risk of accidents or injuries. In some applications, cardan shafts may also include safety mechanisms such as shear pins or torque limiters. These features are designed to protect the shaft and other components from damage by shearing or disengaging in the event of overload or excessive torque, preventing costly repairs and downtime.
6. Suitable for Various Applications:
– Cardan shafts find applications in a wide range of vehicles and equipment across different industries. In the automotive sector, they are used in passenger cars, commercial vehicles, buses, and off-road vehicles to transmit power to the wheels. In the agricultural industry, cardan shafts connect tractors to various implements, such as mowers, balers, or tillers. In the construction and mining sectors, they are employed in machinery like excavators, loaders, and crushers to transfer power to different components. The versatility of cardan shafts makes them well-suited for various applications, providing reliable power transmission and motion.
In summary, cardan shafts offer several benefits for different types of vehicles and equipment. They ensure efficient power transmission, flexibility, and misalignment compensation, adaptability to variable configurations, vibration damping, and smooth operation. Additionally, they incorporate safety features and are suitable for a wide range of applications in automotive, agricultural, construction, and other industries. Cardan shafts play a vital role in enhancing the performance, maneuverability, and safety of vehicles and equipment, contributing to overall productivity and reliability.
editor by CX 2024-03-04
China OEM Truck Pto Cardan Shaft for Farm Implement
Product Description
Truck pto cardan shaft for farm implement
1. Tubes or Pipes
We’ve already got Triangular profile tube and Lemon profile tube for all the series we provide.
And we have some star tube, splined tube and other profile tubes required by our customers (for a certain series). (Please notice that our catalog doesnt contain all the items we produce)
If you want tubes other than triangular or lemon, please provide drawings or pictures.
2.End yokes
We’ve got several types of quick release yokes and plain bore yoke. I will suggest the usual type for your reference.
You can also send drawings or pictures to us if you cannot find your item in our catalog.
3. Safety devices or clutches
I will attach the details of safety devices for your reference. We’ve already have Free wheel (RA), Ratchet torque limiter(SA), Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).
4.For any other more special requirements with plastic guard, connection method, color of painting, package, etc., please feel free to let me know.
Features:
1. We have been specialized in designing, manufacturing drive shaft, steering coupler shaft, universal joints, which have exported to the USA, Europe, Australia etc for years
2. Application to all kinds of general mechanical situation
3. Our products are of high intensity and rigidity.
4. Heat resistant & Acid resistant
5. OEM orders are welcomed
Our factory is a leading manufacturer of PTO shaft yoke and universal joint.
We manufacture high quality PTO yokes for various vehicles, construction machinery and equipment. All products are constructed with rotating lighter.
We are currently exporting our products throughout the world, especially to North America, South America, Europe, and Russia. If you are interested in any item, please do not hesitate to contact us. We are looking CHINAMFG to becoming your suppliers in the near future.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Type: | Fork |
---|---|
Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying |
Material: | Carbon Steel |
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Can cardan shafts be adapted for use in both automotive and industrial settings?
Yes, cardan shafts can be adapted for use in both automotive and industrial settings. They are versatile components that offer efficient power transmission and can be customized to meet the specific requirements of various applications. Let’s explore how cardan shafts can be adapted for both automotive and industrial settings:
1. Automotive Applications:
– Cardan shafts have long been used in automotive applications, especially in vehicles with rear-wheel drive or all-wheel drive systems. They are commonly found in cars, trucks, SUVs, and commercial vehicles. In the automotive sector, cardan shafts are primarily used to transmit torque from the engine or transmission to the differential or axle, allowing power to be distributed to the wheels. They provide a reliable and efficient means of transferring power, even in vehicles that experience varying loads, vibration, and misalignment. Cardan shafts in automotive applications are typically designed to handle specific torque and speed requirements, taking into account factors such as vehicle weight, horsepower, and intended use.
2. Industrial Applications:
– Cardan shafts are also widely used in various industrial settings where torque needs to be transmitted between two rotating components. They are employed in a diverse range of industries, including manufacturing, mining, agriculture, construction, and more. In industrial applications, cardan shafts are utilized in machinery, equipment, and systems that require efficient power transmission over long distances or in situations where angular misalignment is present. Industrial cardan shafts can be customized to accommodate specific torque, speed, and misalignment requirements, considering factors such as the load, rotational speed, operating conditions, and space constraints. They are commonly used in applications such as conveyors, pumps, generators, mixers, crushers, and other industrial machinery.
3. Customization and Adaptability:
– Cardan shafts can be adapted for various automotive and industrial applications through customization. Manufacturers offer a range of cardan shaft options with different lengths, sizes, torque capacities, and speed ratings to suit specific requirements. Universal joints, slip yokes, telescopic sections, and other components can be selected or designed to meet the demands of different settings. Additionally, cardan shafts can be made from different materials, such as steel or aluminum alloy, depending on the application’s needs for strength, durability, or weight reduction. By collaborating with cardan shaft manufacturers and suppliers, automotive and industrial engineers can adapt these components to their specific settings, ensuring optimal performance and reliability.
4. Consideration of Application-Specific Factors:
– When adapting cardan shafts for automotive or industrial settings, it is crucial to consider application-specific factors. These factors may include torque requirements, speed limits, operating conditions (temperature, humidity, etc.), space limitations, and the need for maintenance and serviceability. By carefully evaluating these factors and collaborating with experts, engineers can select or design cardan shafts that meet the unique demands of the automotive or industrial application.
In summary, cardan shafts can be adapted and customized for use in both automotive and industrial settings. Their versatility, efficient power transmission capabilities, and ability to accommodate misalignment make them suitable for a wide range of applications. By considering the specific requirements and collaborating with cardan shaft manufacturers, engineers can ensure that these components provide reliable and efficient power transfer in automotive and industrial systems.
How do cardan shafts handle variations in load, speed, and misalignment during operation?
Cardan shafts are designed to handle variations in load, speed, and misalignment during operation. They incorporate specific features and mechanisms to accommodate these factors and ensure efficient power transmission. Let’s explore how cardan shafts handle these variations:
1. Load Variation:
– Cardan shafts are designed to transmit torque and handle variations in load. The torque capacity of the shaft is determined based on the application’s requirements, and the shaft is manufactured using materials and dimensions that can withstand the specified loads. The design and construction of the shaft, including the selection of universal joints and slip yokes, are optimized to handle the anticipated loads. By choosing appropriate material strengths and dimensions, cardan shafts can effectively transmit varying loads without failure or excessive deflection.
2. Speed Variation:
– Cardan shafts can accommodate variations in rotational speed between the driving and driven components. The universal joints, which connect the shaft’s segments, allow for angular movement, thereby compensating for speed differences. The design of the universal joints and the use of needle bearings or roller bearings enable smooth rotation and efficient power transmission even at varying speeds. However, it’s important to note that excessively high speeds can introduce additional challenges such as increased vibration and wear, which may require additional measures such as balancing and lubrication.
3. Misalignment Compensation:
– Cardan shafts are specifically designed to handle misalignment between the driving and driven components. They can accommodate angular misalignment, parallel offset, and axial displacement to a certain extent. The universal joints in the shaft assembly allow for flexibility and articulation, enabling the shaft to transmit torque even when the components are not perfectly aligned. The design of the universal joints, along with their bearing arrangements and seals, allows for smooth rotation and compensation of misalignment. Manufacturers specify the maximum allowable misalignment angles and displacements for cardan shafts, and exceeding these limits can lead to increased wear, vibration, and reduced efficiency.
4. Telescopic Design:
– Cardan shafts often feature a telescopic design, which allows for axial movement and adjustment to accommodate variations in distance between the driving and driven components. This telescopic design enables the shaft to handle changes in length during operation, such as when the vehicle or equipment undergoes suspension movement or when the drivetrain components experience positional changes. The telescopic mechanism ensures that the shaft remains properly connected and engaged, maintaining power transmission efficiency even when there are fluctuations in distance or position.
5. Regular Maintenance:
– To ensure optimal performance and longevity, cardan shafts require regular maintenance. This includes inspections, lubrication of universal joints and slip yokes, and monitoring for wear or damage. Regular maintenance helps identify and address any issues related to load, speed, or misalignment variations, ensuring that the shaft continues to function effectively under changing operating conditions.
Overall, cardan shafts handle variations in load, speed, and misalignment through their design features such as universal joints, telescopic design, and flexibility. By incorporating these elements, along with proper material selection, lubrication, and maintenance practices, cardan shafts can reliably transmit torque and accommodate the changing operating conditions in vehicles and equipment.
Can you explain the components and structure of a cardan shaft system?
A cardan shaft system, also known as a propeller shaft or drive shaft, consists of several components that work together to transmit torque and rotational power between non-aligned components. The structure of a cardan shaft system typically includes the following components:
1. Shaft Tubes:
– The shaft tubes are the main structural elements of a cardan shaft system. They are cylindrical tubes made of durable and high-strength materials such as steel or aluminum alloy. The shaft tubes provide the backbone of the system and are responsible for transmitting torque and rotational power. They are designed to withstand high loads and torsional forces without deformation or failure.
2. Universal Joints:
– Universal joints, also known as U-joints or Cardan joints, are crucial components of a cardan shaft system. They are used to connect and articulate the shaft tubes, allowing for angular misalignment between the driving and driven components. Universal joints consist of a cross-shaped yoke with needle bearings at each end. The yoke connects the shaft tubes, while the needle bearings enable the rotational motion and flexibility required for misalignment compensation. Universal joints allow the cardan shaft system to transmit torque even when the driving and driven components are not perfectly aligned.
3. Slip Yokes:
– Slip yokes are components used in cardan shaft systems that can accommodate axial misalignment. They are typically located at one or both ends of the shaft tubes and provide a sliding connection between the shaft and the driving or driven component. Slip yokes allow the shaft to adjust its length and compensate for changes in the distance between the components. This feature is particularly useful in applications where the distance between the driving and driven components can vary, such as vehicles with adjustable wheelbases or machinery with variable attachment points.
4. Flanges and Yokes:
– Flanges and yokes are used to connect the cardan shaft system to the driving and driven components. Flanges are typically bolted or welded to the ends of the shaft tubes and provide a secure connection point. They have a flange face with bolt holes that align with the corresponding flange on the driving or driven component. Yokes, on the other hand, are cross-shaped components that connect the universal joints to the flanges. They have holes or grooves that accommodate the needle bearings of the universal joints, allowing for rotational motion and torque transfer.
5. Balancing Weights:
– Balancing weights are used to balance the cardan shaft system and minimize vibrations. As the shaft rotates, imbalances in the mass distribution can lead to vibrations, noise, and reduced performance. Balancing weights are strategically placed along the shaft tubes to counterbalance these imbalances. They redistribute the mass, ensuring that the rotational components of the cardan shaft system are properly balanced. Proper balancing improves stability, reduces wear on bearings and other components, and enhances the overall performance and lifespan of the shaft system.
6. Safety Features:
– Some cardan shaft systems incorporate safety features to protect against mechanical failures. For example, protective guards or shielding may be installed to prevent contact with rotating components, reducing the risk of accidents or injuries. In applications where excessive forces or torques can occur, cardan shaft systems may include safety mechanisms such as shear pins or torque limiters. These features are designed to protect the shaft and other components from damage by shearing or disengaging in case of overload or excessive torque.
In summary, a cardan shaft system consists of shaft tubes, universal joints, slip yokes, flanges, and yokes, as well as balancing weights and safety features. These components work together to transmit torque and rotational power between non-aligned components, allowing for angular and axial misalignment compensation. The structure and components of a cardan shaft system are carefully designed to ensure efficient power transmission, flexibility, durability, and safety in various applications.
editor by CX 2024-01-25
Best Cheap made in China – replacement parts – PTO shaft manufacturer & factory 6X4 pto yoke pins LHD 10 Wheels HOWO 18m3 18 Cubic 18, 000L 18000 Litres Sewage Suction Tanker Truck with ce certificate top quality low price
We – EPG Group the biggest agricultural gearbox and pto manufacturing unit in China with 5 distinct branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
john deere pto include Our tractor source put up gap digger for tractor goods 2011 jeep grand cherokee generate shaft are new generate shaft promoting 52 inch driveshaft well auto drive shaft in g56 pto protect bolts Chinese weasler pto shaft markets propeller shaft factors and weasler pto shaft british isles some products offered in intercontinental marketplaces are effectively gained by Chinese and international clients at house and abroad.
I. Description of 6×4 LHD ten whee EPT HOWO 18m3 eighteen cubic 18,000L 18000 litres sewage suction tanker truck
Purpose:
(1)Vacuum sewage suction truck (also referred to as truck mounted sewage cleaner,vacuum cleaner truck ,vacuum suction truck ,vacuum suction tanker ,vacuum waste selection truck ,sewage suction truck,sewage vacuum truck ,waste vacuum truck ,sewer truck ,cesspit emptier ,gully emptier,and many others.) is utilised to gather, transport and discharge liquid such as filthy h2o,sludge,septic,crude oil and solid stuff these kinds of as little stones,bricks as well.It is suited for cleansing the sewer,cesspit,gully ,and so forth. It is broadly used in atmosphere and sanitation field.
(2)Accent of sewage suction operate :Geared up with PTO, transmission shaft, vacuum suction sewage pump, substantial force molding tank, moisture separator, gas-oil separation, numerous directional manage valve, hanger rod, self-discharging valve, suck fecal gun and pipe network method.
(3)vacuum tank potential ranges from 3,000 Liters to twenty,000 liters
Functions:
a.Cylinder vacuum tank can be lifted hydraulically to 40-forty five diploma.Rear door can be opened and closed hydraulically.
b.Adopt EU vacuum pump (Italy brand name) or equal China prime model double vacuum pumps,tremendous powerful,hugely efficient.
c.Pump can be operated by a hydraulic motor or by an auxiliary motor.
d.Overfill method with tunes horn is equipped ,stopping the vacuum pump hurt from sewage drinking water into vacuum pump when the tank is complete.
e.Good shape ,rational structure,durable and lengthy services life.
II. Complex info of 6×4 LHD ten whee EPT HOWO 18m3 eighteen cubic 18,000L 18000 litres sewage suction tanker truck
Overview | |
Name | Sewage Suction Truck |
Dimension(LxWxH) | 7500X2470X3050(mm) |
Overall Mass | 29800 Kg |
Rated Payload | 16000 Kg |
Kerb Weight | 13800 Kg |
Passenger | three |
Technique/Departure Angle | 33/22 |
The Parameters of Chassis | |
Product | ZZ2127 |
Driving Variety | 6*4 left/correct hand travel |
Wheel Foundation | 4300+1350MM |
Gearbox | Seven/8 pace lever with 6/7 velocity forward and 1 reverse, handbook |
Front/Rear Monitor | 1900/1800(mm) |
Tyre | 12.00R20, with 1 spare tyre |
The Amount of Tyre | 10+1(spare tyre) |
Front/Rear Suspension | 1250/2300(mm) |
Leaf Spring Amount | eight/11+8 |
The Paremeters of Engine | |
Maker/Design | Sinotruck/WD615.sixty nine |
Rated Power | 336hp |
Gas Kind | EPT oil |
Displacement/Ability | 9726ml |
Emission StHangZhourd | Euro2 |
Cylinder | Straight/6/intercooling |
Max. torque | 1500N.m |
Velocity | 2200rpm |
The Parameters of Gear | |
Tank Capacity | 12 m3-18m3 |
Vacuum Pump Rotation Speed | 800r/m-1400r/m |
Max. Suction Raise | >6m |
Vacuum | >500mmHg |
Rotation Direction | Clockwise |
Time for total sucktion | <5min |
Widespread Equipment | Vacuum pump,ball valve,oil cylinder for rear cap,oil cylinder for dumping,strain meter,window for demonstrating liquid degree,lock program for rear cap,4-way valve, dampness separator,sprinkler (optional), alarm for total suction (optional). |
III. VACUUM SEAGE SUCTION TRUCK Information
V. VACUUM SEWAGE SUCTION TRUCK WORKMANSHOP
VI. Much more Selection OF VACUUM SEWAGE SUCTION TRUCK FOR YOUR REFERENCE.
VII. Shipping:RORO/BULK VESSEL/CONTAINER
RORO: The truck is pushed to the ship inside of directly and mounted well. It can defend the truck currently being rusty and broken for the duration of shipping and delivery.
BULK: The truck is lifted by crane then place on the vessel deck. This model is significantly more affordable.
CONTAINER: The truck is put into the container. This design is employed for tiny model vehicles
VIII. ABOUT US
(1) Much more than 500 employees, big and sophisticated production
(2) 25 professional engineers, can offer the greatest and least expensive design
(3) Create rigorous QC group to ensure the top quality
(4) 1 yr or thirty,000km guarantee which arrives initial.
(5) 1 set of spare components of chassis supplied which will help you preserve funds on maintenance.
(6) Offer technological assist and right after serive for life.
(7) Professional income group which will aid you to pick suited truck.
Best sales made in China – replacement parts – PTO shaft manufacturer & factory Heavy pto mounting bolts Truck Parts Air Filter 1432PU with High Quality with ce certificate top quality low price
We – EPG Team the largest agricultural gearbox and pto manufacturing unit in China with 5 various branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
pto shaft guard areas Our pto shaft defend organization bondioli & pavesi pto areas is 2001 jeep grand cherokee front push shaft positioned 2013 f150 push shaft in wj entrance driveshaft swap XiHu remove u joint pto shaft HangZhou pto shaft addresses for sale Zhejiang mazda 6 generate shaft Province. pto shaft with slip clutch T Our items are promoting well in Chinese markets and some items bought in international markets are well received by Chinese and international clients at house and abroad. HangZhou E EPT World EPT TRADE CO.LTD
EPT HOWO SHCAMAN XIHU (WEST LAKE) DIS.FENG AIR FILTER 1432PU
- T088100L6
- VG0003070092
- VG0003098571
- VG0003098012
- VG0003098015
- VG0003098018
- VG0003098571
- VG157171038
- VG157171050
- VG157180002
- VG157180004
- VG157180005
- VG157180006
- VG157180008
- VG157180015
- VG157110003
- VG157115710
- VG157115711
- VG157115712
- VG157115713
- VG1062571001
- VG1062060004
- VG1062060006
- VG1062060007
- VG106206571
- VG1062060011
- VG1062060015
- VG106206571
- VG1062060026
- 3246
- 3247
- 3248
- 3249
- 3250
- 3251
- 3252
- 2851PUY
- K2841
- 4225
- 3448
- 2751PU
- 3041
- 3040
- 3039
- 3038 AIR FILTER
- 3448
-
Our firm informations
HangZhou E EPT Globe EPT Trade Co.,Ltd is a professional truck spare parts and EPT machine parts supplier in China. All staffs have more than 10-years experience on truck components industry and cooperation with oversea companies many years make us specialist in EPT trade also.
At existing, we can give substantial quality spare areas for HOWO(SINOTRUK), XIHU (WEST LAKE) DIS.N(GENLYON), SHACMAN, FOTON(AUMAN),YUXIHU (WEST LAKE) DIS., FAW(jiefang) ,JAC, SHXIHU (WEST LAKE) DIS.I, XCMG, XGMA, LIUGONG,LINGONG And many others.
Merchandise lines which includes: clutch clutch plate , clutch disc, clutch strain plate, alternators, starters, turbochargers, piston , piston kits, piston ring,gaskets kits, cylinder liner,drinking water pump, flywheel, filters , oil filters , gas filters, air filter, air cleaner, cylinder head , cylinder block, cylinder gaskets, major bearing, cod-rod bearing, join rod front spring, rear spring assy, front include, front bumper, breaket, bracket, spring, gas tank, big difference assy, pto- pump, brake drum, bearing, shock absorber, piston(G1),pistion, hollow shaft, push rod, exhaust pipe,exhaust shaft,vent-pipe, assistance, alternater belt, supporter belt, air-condition belt, rubber seat, bush, nylon bush, bolt, wheel bolt, rear wheel bolts, starter essential, crack EPT ,split liner, head lamp , front lamp. Gentle lamp, fog lamp, rear mirror, A pole, fenders , meals steps, bumper, doorway assy, seats, driver seat, sunlight visor, mud guard, gears, mixture lamp, mastercylinder, brake EPT non asbseto, cylinder head , engine, cabin, trucks, rear see mirror, enjection pump, rubber hose, double h valve, howo cabin , blend swap, compressor, tie rod. Ball joint. Whee EPT , rim, shock absorber, clutch plate,alloy wheels, steering, clutch kits.bearings
FAQ
Q1. What is your conditions of packing?
A: Normally, we pack our goods in neutral boxes and factory cartons. If you have legally registered packages
we can pack the items in your branded packing containers after obtained your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% just before shipping. We are going to present you the images of the goods and packages
just before you spend the harmony.
Q3. What is the conditions of shipping?
A: EXW, FOB, CFR, CIF, DDU.
This fall. How about your supply time?
A: Usually, it will just take 7- 20 doing work days after getting your EPT payment. The particular shipping time depends
on the objects and the quantity of your order.
Q5. Can you create according to the samples?
A: Indeed, we can make by your samples or complex drawings. We can build the molds and fixtures.
Q6. how to handle the items high quality?
A: 1. we have a professional high quality management crew , who have functioning on truck elements business for a lot of a long time and have wealthy knowledge on checking. each and every areas before shipping and delivery will be examining .
two. we have EPT factories cooperation.
WELCOME YOU Send out INQUIRY TO US , WE WOULD LIKE TO Offer you YOU OUR Ideal Support AND Price tag!
EPT TO Creating Earn-Earn COOPERATIONS RELATIONS WITH YOU
Best Cost made in China – replacement parts – PTO shaft manufacturer & factory Dz9100130011 tractor supply pto shafts Power Steering Pump for Shacman Truck F3000 with ce certificate top quality low price
We – EPG Group the most significant agricultural gearbox and pto factory in China with 5 various branches. For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
yoke for pto shaft Beneath u joint for pto shaft the bmw e90 rear generate shaft substitution guidance drive shaft alza of polaris ranger generate shaft managerial tractor pto shaft duration feeling 2001 chevy silverado drive shaft of pto shaft types “Serving 2004 dodge ram 1500 entrance travel shaft agriculture, tarter tiller pto shaft scoring a good results by way of good quality of goods and honesty in organization”, our goods have been reliable by clients and have acquired a more substantial share of market. The business covering 88,000 square meters, has superior gear and robust technical power, these kinds of as the numerical manage device equipment and machining centers, CAD/CAM system, industrial robotic and many others. HangZhou E EPT Planet EPT TRADE CO.LTD
DZ9100130011 electrical power steering pump for shacman truck F3000
Requirements:
one. elements No.: DZ9100130011/WG9100130011/SZ9100130011
two. Kind: ZYB-1516R/a hundred and forty four-seventeen
3. Vehicles: SHCMAN DELONG, EPT SITRAK
4. Engine: EPT wp10 EPT engines
5. Gears: 17
six.: Brand name: qingchuan
7. Product: hyraulic
8. other components No.: 61260013571 612630030087(ZYB-1318R/353-2)
nine. 612630030005 (ZYB-1816R/353-1)
10. Engine sort: wd615-67 CA41132
11.: First : ZheJiang CHINA, HangZhou CHINA,
12. Loading parts: HangZhou china
13. supply approach: BY sea, by air , by convey
14. payment: T/T, L/C,WESTERN UNION
15. Delivery time : 3-fifteen operating times
warehouse and sample room
OUR customers
OUR SERVISE
1. Reply your enquiry in 24 hours.
2. OEM, customer layout,consumer label services supplied.
three. Our merchandise line such as trucks and machinery spare parts: EPT HOWO,XIHU (WEST LAKE) DIS.N GENLYON, SHACMAN,YUXIHU (WEST LAKE) DIS. JAC AND SHXIHU (WEST LAKE) DIS.I,LIUGONG,XCMG,XGMA ,etc.
four. Exclusive and exclusive resolution can be supply to our customer by our properly-skilled and professional engineers and staffs.
5, .Shipping time: tiny purchase can be ship in three working times soon after acquired payment. Complete container orders can be send out in fifteen-twenty operating days.
6.Shipping and delivery approaches: by sea, by air, by teach and by specific, depands on your purchase amount.
seven, we can offer total line truck spare areas for buyers: engine elements , chassis elements, body parts, clutch components, brake areas, gearbox components, axle elements.
8.we can prepare delivery by means of sea , or air or express. Depands on get amount and your requirement!
9. payment way: T/T, L/C, D/P, Western Union, moneygram
10. LOADING Ports: Any port in china.
11. Original: HangZhou ,China.
OUR Workplace:
LOADING AND Shipping and delivery
Our company informations
HangZhou E EPT Globe EPT Trade Co.,Ltd is a professional truck spare parts and EPT machine parts provider in China. All staffs have more than ten-years experience on truck areas industry and cooperation with oversea companies many years make us professional in EPT trade also.
At current, we can provide high quality spare components for HOWO(SINOTRUK), XIHU (WEST LAKE) DIS.N(GENLYON), SHACMAN, FOTON(AUMAN),YUXIHU (WEST LAKE) DIS., FAW(jiefang) ,JAC, SHXIHU (WEST LAKE) DIS.I, XCMG, XGMA, LIUGONG,LINGONG And so forth.
Items traces such as: clutch clutch plate , clutch disc, clutch pressure plate, alternators, starters, turbochargers, piston , piston kits, piston ring,gaskets kits, cylinder liner,drinking water pump, flywheel, filters , oil filters , gas filters, air filter, air cleaner, cylinder head , cylinder block, cylinder gaskets, primary bearing, cod-rod bearing, link rod entrance spring, rear spring assy, front cover, front bumper, breaket, bracket, spring, fuel tank, difference assy, pto- pump, brake drum, bearing, shock absorber, piston(G1),pistion, hollow shaft, push rod, exhaust pipe,exhaust shaft,vent-pipe, assistance, alternater belt, fan belt, air-situation belt, rubber seat, bush, nylon bush, bolt, wheel bolt, rear wheel bolts, starter essential, split EPT ,split liner, head lamp , front lamp. Light-weight lamp, fog lamp, rear mirror, A pole, fenders , meals steps, bumper, door assy, seats, driver seat, sunshine visor, mud guard, gears, blend lamp, mastercylinder, brake EPT non asbseto, cylinder head , motor, cabin, vehicles, rear see mirror, enjection pump, rubber hose, double h valve, howo cabin , blend swap, compressor, tie rod. Ball joint. Whee EPT , rim, shock absorber, clutch plate,alloy wheels, steering, clutch kits.bearings
Best near me shop made in China – replacement parts – PTO shaft manufacturer & factory 6X4 vehicle propeller shaft Shacman 16-18tons Rhd LHD 16000 Litres 18000 Litres 16cbm 18cbm Suction Sewag Sludge Tank Truck Suction Sewage Truck Sewer Vacuum Truck Sewage Suction Truck with ce certificate top quality low price
We – EPG Team the greatest agricultural gearbox and pto manufacturing unit in China with 5 different branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
traxxas summit travel shaft Beneath alternative pto shaft the metric pto shafts advice vw golf push shaft of ford post gap digger pto shaft managerial 2017 polaris ranger prop shaft perception pto shaft picture of a thousand rpm pto shaft “Serving doghouse diesel a single piece driveshaft agriculture, 2007 chrysler pacifica push shaft scoring a success via high quality of goods and honesty in enterprise”, our products have been trusted by customers and have acquired a more substantial share of market. The company covering 88,000 square meters, has advanced gear and strong technical strength, this kind of as the numerical handle device resources and machining facilities, CAD/CAM technique, industrial robot and so forth.
Photographs Demonstrate
Solution Discription
Drive Program | 6×4 | |
Proportions(L*W*H)(mm) | Total | 9300x2490x3450 |
Tank physique | 10,000 liters | |
Hydraulic lifting method | entrance lifting | |
Wheel base (mm) | 4375+1400 | |
Engine | ISME345 30 ( Weichai, Euro 2) | |
Horsepower | 345 hp | |
Ma.torque ( N,m) | 1460 | |
Displacement (L) | 9.7L | |
Gearbox | 10JSD180 , F EPT Gearbox | |
Clutch | 430 Diaphragm type | |
Steering | ZF technology | |
Cab | F3000 Flat Cabin with A/C & single-sleeper | |
Axle | Entrance axle | seven.5T Guy technology |
Rear axle | 13T Guy casting axle, closing ratio 4.266 | |
Tyre (radial tyre) | twelve.00R20 | |
Oil tank | 400L(ALLOY) | |
Pump | Install water ring vacuum suction pump for 12000Liters Sewage suction truck. the drinking water ring vacuum suction pump has adequate suction vacuum in contrast with the classic rotary vane vacuum pump has the rewards of compact structure, dependable function and stream evenly balanced, robust, EPT and reliable perform, basic procedure and hassle-free maintenance. Is a comparatively sophisticated sewage suction truck. |
Attributes:
one.Cylinder vacuum tank can be lifted hydraulically to 40-45 degree.Rear door can be opened and shut hydraulically.
two.Undertake EU vacuum pump (Italy brand) or equivalent China best brand name double vacuum pumps,super powerful,extremely efficient.
three.Pump can be operated by a hydraulic motor or by an auxiliary motor.
4.Overfill program with audio horn is outfitted ,stopping the vacuum pump damage from sewage drinking water into vacuum pump when the tank is full.
5.Great condition ,rational construction,tough and long services existence.
Product Details
Item Funtions
(1)Vacuum sewage suction truck (also named truck mounted sewage cleaner,vacuum cleaner truck ,vacuum suction truck ,vacuum suction tanker ,vacuum waste selection truck ,sewage suction truck,sewage vacuum truck ,waste vacuum truck ,sewer truck ,cesspit emptier ,gully emptier,and so on.) is employed to accumulate, transportation and discharge liquid this kind of as filthy water,sludge,septic,crude oil and reliable stuff this sort of as modest stones,bricks as well.It is appropriate for cleansing the sewer,cesspit,gully ,and so on. It is commonly used in environment and sanitation discipline.
(2)Accessory of sewage suction operate :Outfitted with PTO, transmission shaft, vacuum suction sewage pump, high pressure molding tank, dampness separator, gasoline-oil separation, numerous directional management valve, hanger rod, self-discharging valve, suck fecal gun and pipe community program.
Customers Go to
Our Positive aspects
1.With well experienced feed truck production company to offer high quality and competitive prices dump truck to our worldwide valuable customers.
2.An professional team which is experienced with international market and has strong technical capability to customized cost effective,since we have much more than 60 Designer and engineers as our solid backing.Amongst them,our specialized adviser has far more than 40years’ experience in the dump truck subject.
3.Sell well in the international markets, such as African market ( Sudan, Angola, Zimbabwe, Liberia, Djibouti, Congo, Kenya, Ghana ect.), Middle East, South Asia and South-America market etc..
four.Two Years Guarantee for all the the beam of trailers, timely shipment.
Associated Goods
FAQ
Q1. What is actually your MOQ?
1 device trailer or truck.
Q2. Can you satisfy my EPT prerequisite?
Certainly! We are immediate manufacturer and we have strong producing ability and R&D ability!
Q3.How about your merchandise quality?
High top quality has constantly been our advantage.We all use large high quality manufacturer materia EPT with one hundred% high quality assurance.Set up a method to examine products at all stages of the manufacturing approach,uncooked supplies,process supplies,validated or analyzed materia EPT concluded products ect.
This fall. How can I get the price of your truck?
You can contact with us via any of the adhering to speak to information. Our personalized provider person will react you inside 24 several hours.
Q5: What is actually the shipping time?
The shipping time is in thirty-fifty operating days after acquiring your EPT payment.
Best China manufacturer & factory PTO shafts Heavy Truck Cheap Universal Joint Shaft Cross Kits With high quality best price
Our company pays particular attention to customers’ needs, listening to the specific requirements of each customer and guaranteeing total satisfaction. EPG Drive Worm Gears Worm Gear Model HP Model HP double-enveloping worm gear speed reducers are designed for all applications that require extremely high torque and accuracy in a quiet, compact packag EPG Drive Worm Gear Model HPe. Model HP speed reducers have higher shock resistance, greater endurance to withstand heavy starting and stopping loads, and can easily transmit two to three times as much torque as cylindrical worm gearing. Precision is increased, and backlash, chatter and noise are minimized. These speed reducers are designed for applications such as metalworking machinery, printing equipment and packaging machinery, mining equipment, and many others. Model HP double and triple reduction worm gear speed reducers combine multiple single reduction speed reducers into one assembly. These units are built using true double-enveloping worm gearing. Each of the gearsets is supported by heavy-duty tapered roller bearings and housed in its own heat dissipating housing.
Overview
Quick Details
- Warranty:
-
1.5 years
- Applicable Industries:
-
Manufacturing Plant
- After Warranty Service:
-
Online support
- Local Service Location:
-
none, Italy
- Showroom Location:
-
ITALY
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- certificate:
-
CE
- Material:
-
Metal
- Processing of yoke:
-
Forging
- Design:
-
Customized
- Certificate:
-
CE Certificate.
Supply Ability
- Supply Ability:
- 20000 Piece/Pieces per Month
Packaging & Delivery
- Packaging Details
- Iron crates
- Port
- NINGBO OR SHANGHAI
Online Customization
Product InfIt is our aim to supply a vast range of quality products at affordable prices, provide the best service for customers satisfied and contribute to our continued improvement. ormation
Product Information
PTO Shaft
The power take-off (PTO) is a sophisticated mechanism, allowing implements to draw energy from the engine and transmit it to another application. It works as a mechanical gearbox which can be mounted on the vehicle’s transmission.
The power take-off shaft (PTO shaft) is a critical component, designed and manufactured for continuous heavy-duty use. A good PTO shaft should be strong enough to bear the torsion and shear stress and minimize vibration.
Setforge, the forging subsidiary of Ever-Power Group, manufactures cold extruded PTO shafts for all types of agriculture vehicles. Our PTO shafts offer great dependability and durability during daily use.
EP Group has been internationally recognized as a reliable global supplier. Our state-of-the-art manufacturing process and experienced engineers ensure the top-quality of all Farinia components.
After Warranty Service | Video technical support |
Applicable Industries | Manufacturing Plant |
Local Service Location | Italy |
Showroom Location | Italy |
Warranty | 1.5 years |
Place of Origin | China |
China | Zhejiang |
Brand Name | EPG |
certificate | CE |
Material | Metal |
Processing of yoke | Forging |
Design | Customized |
Certificate | CE Certificate. |
Product Display
Product Display
6″ Heavy Duty Eart …
6″ Rock Auger
PTO Drive Line Gen …
CompanyInfo
Company Profile
Ever-Power Group
EPG have high-tech machinery and test equipment. We can produce world class high precision products.
Certifications
Certifications
Shipment & Payment
Our Advantages
A: Your inquiry related to our products or prices will be replied in 24 hours.
B: Protection of your sales area, ideas of design and all your private information.
C: Best quality and competitive price.
……
faq
FAQ
1) How can I place order?
A: YouSlip Clutch PTO Shaft for Compact Tractor Tillers NEW SLIPCLUTCH PTO SHAFT FOR COMPACT TRACTOR TILLERS ROTO TILLERS BUSHHOG RHINO KINGKUTTER,CARONI,MASCHIO,JOHN DEERE, MOST MODELS three different types of PTO in operation: a non shear, shear pin and slip clutch — the last being the most expensive. Implement end of non shear (r) and shear type (l) Non shear: this is a solid yoke to yoke set up and used with the expectation that certain equipment will not encounter any sudden stops. I figure that the finishing mower does not need a shear set up as the blades will slip to a degree being belt driven and my other mower, the flail mower, is extremely forgiving in its design. can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.
……
Dongfeng China john deere b pto shaft removal in Lucknow India LHD Rhd Vacuum Sewage Suction Truck Sewage Truck 8cbm 9cbm with ce certificate top quality low price
We – EPG Group the most significant agricultural gearbox and pto manufacturing facility in China with five diverse branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
Xihu (West Lake) Dis.feng LHD/RHD vacuum sewage suction truck sewage truck 8cbm 9cbm
1.Chassis :
a.Generate variety: 4×2,4×4,6×2,6×4,6×6,8×4 and so on.
b.Our manufacturing unit has very good organization partnership with FAW,SINOTRUCK ,XIHU (WEST LAKE) DIS.FENG ,SHACMAN,JAC.JMC,FOTON,ISUZU,etc.
2.Tanker entire body:From 2m3 to 25m3 capacity
3.Accessory of sewage suction factions:Equipped with PTO, transmission shaft, vacuum suction sewage pump, high pressure molding tank, humidity separator, gasoline-oil separation, multiple directional management valve, hanger rod, self-discharging valve, suck fecal gun and pipe network system.
Merchandise | unit | parameter | |
Automobile model | CLW5161GXWD5 Sewage Suction Truck | ||
Chassis product | DFL1160BX1V | ||
Overall proportions | mm | 8300×2490×3380 | |
Simple fact cubage | L | 8000-9000 | |
Mass in operating order | kg | Appro×8805 | |
Entire body interior dimensions | mm | 4500×1600 | |
Wheel foundation | 4700 | ||
F/R monitor foundation | 1880/1860 | ||
Technique/departure angle | ° | 20/eleven | |
Exhaust/kw | ml/kw | 5900/132 | |
Max velocity | km/h | ninety | |
Tire specification | 9.00R20 | Engine kind | ISB180 50 |
Traction program | 4×2 | Transmission | 6-pace with more than generate |
Amount of axles | two | Electric method | 24v |
Procedure control program | Electrically hydraulic management | Allowable passengers in taxi | 3 |
Equipment | With electrical power just take off, transmission shaft, high stress sewage tank, pipe community, sewage pipe for observing and cleanout gear. | ||
With water and fuel oil separators, anti-overflow valve. | |||
With dump purpose, hydraulic opening again doorway. | |||
Engine | Xihu (West Lake) Dis.feng Cummins Engine Co., Ltd. EPT engine 180HP | ||
Generation cycle | fifteen-twenty times | ||
Warranty | twelve month, from the date of provide |
More informations about the vans , please truly feel cost-free to get in touch with with me !
Good Good quality , Low Price tag , Excellent Service
Hunting forward to your any inquiry !!!
Packaging&Shipping and delivery :
Nude Packing by RO-RO , Bulk Cargo Ship or Body box sea delivery ,can in accordance to client’s specifications .
Supply Time : 15-20 times of functioning , after the vendor get the buyer’s deposits .
Payment Phrases: thirty% TT as deposits before create and 70% TT before shlpment . or thirty%TT before produce and 70% LC at sight . or one hundred% LC at sight .
For far more informations , please truly feel free of charge to send inquiry to us , we will reply you at our first time inside of 24 hrs .
5cbm China 10 spline pto shaft Dongfeng Duolika 1000 Gallons 5tons 5000 Liter Sewage Water Tank Truck for Sale with ce certificate top quality low price
We – EPG Team the most significant agricultural gearbox and pto factory in China with 5 various branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
EPG Group PTO shafts can be utilized for speeds up to a thousand rpm. The optimum working duration of the PTO shafts may differ according to the dimension of the tubes The variety of the PTO shafts of RPG Group consists of four sequence , according to the tube shape –Driven (outer) yoke exact same as generate yoke but is mounted on the put into action. There are two types of shafts, domestic and metric, which are identifiable by their styles. Domestic are normally one particular of four styles: spherical, sq., rectangle or splined. Metric are: bell, star or football formed. In both circumstance the major (entrance) shaft is the identical condition as the secondary shaft, only even bigger so that the secondary shaft suits within. This makes it possible for a telescoping result to just take area when the employ is raised on the three pt. or during a turning motion these kinds of as a bailer. All shafts have to be sized ahead of use. Attach the employ to the 3 pt. and raise and assistance it. Attach the appropriate finish to the tractor and endeavor to connect the other to the employ. If the shaft is also lengthy trim a single of the shafts with a hack saw and try out it yet again till it fits. This permits for the apply to be elevated with no binding. The shafts must overlap as much as allowed. how to remove pto shaft guard Major series six pto shaft with slip clutch merchandise king kutter pto shaft shield contain: rototiller pto shaft manure nissan push shaft spreading bush hog pto shaft with slip clutch truck, semi drive shaft potato 2006 chevy silverado drive shaft planting/harvesting auger pto shaft tractor provide equipment, pto shaft producers in coimbatore disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler equipment, rotary tiller, rear blade, fertilizer spreader, blend rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its equipment: Plow disc blades, harrowing film, plough idea and share, cultivator tine, casting areas and so on. The firm covering 88,000 square meters, has superior products and strong specialized energy, these kinds of as the numerical control machine resources and machining centers, CAD/CAM system, industrial robotic etc.
I. Description of 5CBM Dongfeng duolika 1000 gallons 5tons 5000 liter sewage water tank truck for sale
Purpose:
(1)Vacuum sewage suction truck (also called truck mounted sewage cleaner,vacuum cleaner truck ,vacuum suction truck ,vacuum suction tanker ,vacuum waste selection truck ,sewage suction truck,sewage vacuum truck ,waste vacuum truck ,sewer truck ,cesspit emptier ,gully emptier,and so forth.) is utilised to gather, transportation and discharge liquid this sort of as dirty h2o,sludge,septic,crude oil and reliable things this sort of as modest stones,bricks as properly.It is suitable for cleansing the sewer,cesspit,gully ,and so on. It is commonly employed in surroundings and sanitation field.
(two)Accent of sewage suction operate :Outfitted with PTO, transmission shaft, vacuum suction sewage pump, higher pressure molding tank, humidity separator, gasoline-oil separation, several directional handle valve, hanger rod, self-discharging valve, suck fecal gun and pipe community method.
(three)vacuum tank ability ranges from three,000 Liters to 20,000 liters
Attributes:
a.Cylinder vacuum tank can be lifted hydraulically to 40-forty five diploma.Rear door can be opened and closed hydraulically.
b.Adopt EU vacuum pump (Italy brand name) or equivalent China prime model double vacuum pumps,super strong,highly productive.
c.Pump can be operated by a hydraulic motor or by an auxiliary engine.
d.Overfill method with tunes horn is outfitted ,stopping the vacuum pump hurt from sewage water into vacuum pump when the tank is complete.
e.Wonderful shape ,rational structure,tough and prolonged services lifestyle
II. Specialized info of 5CBM Dongfeng duolika one thousand gallons 5tons 5000 liter sewage drinking water tank truck for sale
Automobile Description | ||
Overall dimensions | 6000*2100*2600mm | |
GVW | 7300kg | |
Mass in operating buy | 4000kg | |
Chassis manufacturer | DONGFENG | |
Traction variety | 4*two | |
Tanker Description | ||
Tanker | Capability | 4cbm |
Material | 5mm thickness, high high quality carbon metal | |
Composition | Welding, vacuum tank, Cylindrical | |
Pump | Kind | Vacuum pump |
Flux | 45(L/S) | |
Score speed | 500~800(r/min) | |
Shaft electrical power | four(kw) | |
Attributes | Lower speed, minimal gas intake, low noise, high vacuum, large performance | |
Manufacture | Hangzhou WEILONG Pump Co., Ltd. | |
Pipe | Suction and discharge pipe | |
Special operate | Suction time ≤ 5min, | |
Powerful suction assortment ≥ eight, | ||
Max vacuum diploma ≤ fifteen Kpa, | ||
dump angle ≥ 45 | ||
Normal configuration | Equipped with Examine window,discharge valve,cleansing apparatus,five meter lengthy suction pipe,oil-h2o separators, overflow valve,and many others. | |
Cylinder vacuum tank can be lifted hydraulically to | ||
forty-forty five degree. Rear doorway can be opened and closed hydraulically. | ||
Optional configuration | Tanker content: stainless metal or carbon metal | |
Vacuum pump : Italy or Spain vacuum pumps. | ||
Anti-rust coating inside tank |
III. VACUUM SEAGE SUCTION TRUCK Details
V. VACUUM SEWAGE SUCTION TRUCK WORKMANSHOP
VI. A lot more Option OF VACUUM SEWAGE SUCTION TRUCK FOR YOUR REFERENCE.
VII. Delivery:RORO/BULK VESSEL/CONTAINER
RORO: The truck is pushed to the ship inside straight and fixed effectively. It can shield the truck currently being rusty and damaged in the course of shipping and delivery.
BULK: The truck is lifted by crane then place on the vessel deck. This model is much cheaper.
CONTAINER: The truck is set into the container. This model is utilised for little model vehicles
VIII. ABOUT US
(one) More than five hundred staff, big and advanced production
(2) 25 specialist engineers, can supply the greatest and most affordable style
(3) Create stringent QC staff to promise the top quality
(four) one year or thirty,000km warranty which will come initial.
(5) 1 set of spare areas of chassis offered which will help you preserve cash on servicing.
(6) Offer specialized assist and after serive for lifestyle.
(7) Professional revenue staff which will help you to select appropriate truck.
The use of original tools manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our company and the listed replacement elements contained herein are not sponsored, accredited, or made by the OEM.