Product Description
You can kindly find the specification details below:
HangZhou Mastery Machinery Technology Co., LTD helps manufacturers and brands fulfill their machinery parts by precision manufacturing. High-precision machinery products like the shaft, worm screw, bushing, couplings, joints……Our products are used widely in electronic motors, the main shaft of the engine, the transmission shaft in the gearbox, couplers, printers, pumps, drones, and so on. They cater to different industries, including automotive, industrial, power tools, garden tools, healthcare, smart home, etc.
Mastery caters to the industrial industry by offering high-level Cardan shafts, pump shafts, spline shafts, and stepped shafts that come in different sizes ranging from diameter 3mm-50mm. Our products are specifically formulated for transmissions, robots, gearboxes, industrial fans, drones, etc.
Mastery factory currently has more than 100 main production equipment such as CNC lathe, CNC machining center, CAM Automatic Lathe, grinding machine, hobbing machine, etc. The production capacity can be up to 5-micron mechanical tolerance accuracy, automatic wiring machine processing range covering 3mm-50mm diameter bar.
Key Specifications:
| Name | Shaft/Motor Shaft/Drive Shaft/Gear Shaft/Pump Shaft/Worm Screw/Worm Gear/Bushing/Ring/Joint/Pin |
| Material | 40Cr/35C/GB45/70Cr/40CrMo |
| Process | Machining/Lathing/Milling/Drilling/Grinding/Polishing |
| Size | 2-400mm(Customized) |
| Diameter | φ15(Customized) |
| Diameter Tolerance | f9(-0.016/-0.059) |
| Roundness | 0.05mm |
| Roughness | Ra0.8 |
| Straightness | 0.01mm |
| Hardness | HRC50-55 |
| Length | 257mm(Customized) |
| Heat Treatment | Customized |
| Surface treatment | Coating/Ni plating/Zn plating/QPQ/Carbonization/Quenching/Black Treatment/Steaming Treatment/Nitrocarburizing/Carbonitriding |
Quality Management:
- Raw Material Quality Control: Chemical Composition Analysis, Mechanical Performance Test, ROHS, and Mechanical Dimension Check
- Production Process Quality Control: Full-size inspection for the 1st part, Critical size process inspection, SPC process monitoring
- Lab ability: CMM, OGP, XRF, Roughness meter, Profiler, Automatic optical inspector
- Quality system: ISO9001, IATF 16949, ISO14001
- Eco-Friendly: ROHS, Reach.
Packaging and Shipping:
Throughout the entire process of our supply chain management, consistent on-time delivery is vital and very important for the success of our business.
Mastery utilizes several different shipping methods that are detailed below:
For Samples/Small Q’ty: By Express Services or Air Fright.
For Formal Order: By Sea or by air according to your requirement.
Mastery Services:
- One-Stop solution from idea to product/ODM&OEM acceptable
- Individual research and sourcing/purchasing tasks
- Individual supplier management/development, on-site quality check projects
- Muti-varieties/small batch/customization/trial orders are acceptable
- Flexibility on quantity/Quick samples
- Forecast and raw material preparation in advance are negotiable
- Quick quotes and quick responses
General Parameters:
If you are looking for a reliable machinery product partner, you can rely on Mastery. Work with us and let us help you grow your business using our customizable and affordable products. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Customized |
|---|---|
| Condition: | New |
| Color: | Black |
| Certification: | CE, DIN, ISO |
| Type: | Universal Joint |
| Application Brand: | Nissan, Iveco, Toyota, Ford |
| Customization: |
Available
| Customized Request |
|---|
How do manufacturers ensure the compatibility of cardan shafts with different equipment?
Manufacturers take several measures to ensure the compatibility of cardan shafts with different equipment. These measures involve careful design, engineering, and manufacturing processes to meet the specific requirements of diverse applications. Let’s explore how manufacturers ensure compatibility:
1. Application Analysis:
– Manufacturers begin by analyzing the application requirements and specifications provided by customers. This analysis includes understanding factors such as torque, speed, misalignment, operating conditions, space limitations, and other specific needs. By evaluating these parameters, manufacturers can determine the appropriate design and configuration of the cardan shaft to ensure compatibility with the equipment.
2. Customization Options:
– Manufacturers offer customization options for cardan shafts to meet the unique requirements of different equipment. This includes providing various lengths, sizes, torque capacities, connection methods, and material options. Customers can work closely with manufacturers to select or design a cardan shaft that fits their specific equipment and ensures compatibility with the system’s power transmission needs.
3. Engineering Expertise:
– Manufacturers employ experienced engineers who specialize in cardan shaft design and engineering. These experts have in-depth knowledge of mechanical power transmission and understand the complexities involved in ensuring compatibility. They use their expertise to design cardan shafts that can handle the specific torque, speed, misalignment, and other parameters required by different equipment.
4. Computer-Aided Design (CAD) and Simulation:
– Manufacturers utilize advanced computer-aided design (CAD) software and simulation tools to model and simulate the behavior of cardan shafts in different equipment scenarios. These tools allow engineers to analyze the stress distribution, bearing performance, and other critical factors to ensure the shaft’s compatibility and performance. By simulating the cardan shaft’s behavior under various loading conditions, manufacturers can optimize its design and validate its compatibility.
5. Quality Control and Testing:
– Manufacturers have stringent quality control processes in place to ensure the reliability, durability, and compatibility of cardan shafts. They conduct thorough testing to verify the performance and functionality of the shafts in real-world conditions. This may involve testing for torque capacity, speed limits, vibration resistance, misalignment tolerance, and other relevant parameters. By subjecting the cardan shafts to rigorous testing, manufacturers can ensure their compatibility with different equipment and validate their ability to deliver reliable power transmission.
6. Adherence to Standards and Regulations:
– Manufacturers follow industry standards and regulations when designing and manufacturing cardan shafts. Compliance with these standards ensures that the shafts meet the necessary safety, performance, and compatibility requirements. Examples of such standards include ISO 9001 for quality management and ISO 14001 for environmental management. By adhering to these standards, manufacturers demonstrate their commitment to producing compatible and high-quality cardan shafts.
7. Collaboration with Customers:
– Manufacturers actively collaborate with customers to understand their equipment and system requirements. They engage in discussions, provide technical support, and offer guidance to ensure the compatibility of the cardan shafts. By fostering a collaborative relationship, manufacturers can address specific challenges and tailor the design and specifications of the shaft to meet the unique requirements of different equipment.
In summary, manufacturers ensure the compatibility of cardan shafts with different equipment through application analysis, customization options, engineering expertise, CAD and simulation tools, quality control and testing, adherence to standards, and collaboration with customers. These measures allow manufacturers to design and produce cardan shafts that meet the specific torque, speed, misalignment, and other requirements of various equipment, ensuring optimal compatibility and efficient power transmission.
Can cardan shafts be customized for specific vehicle or equipment requirements?
Yes, cardan shafts can be customized to meet the specific requirements of different vehicles or equipment. Manufacturers offer a range of customization options to ensure that the cardan shafts are tailored to the unique needs of each application. Let’s explore how cardan shafts can be customized:
1. Length and Size:
– Cardan shafts can be manufactured in various lengths and sizes to accommodate the specific dimensions of the vehicle or equipment. Manufacturers can customize the overall length of the shaft to ensure proper alignment between the driving and driven components. Additionally, the size of the shaft, including the diameter and wall thickness, can be adjusted to meet the torque and load requirements of the application.
2. Torque Capacity:
– The torque capacity of the cardan shaft can be customized based on the power requirements of the vehicle or equipment. Manufacturers can design and manufacture the shaft with appropriate materials, dimensions, and reinforcement to ensure that it can transmit the required torque without failure or excessive deflection. Customizing the torque capacity of the shaft ensures optimal performance and reliability.
3. Connection Methods:
– Cardan shafts can be customized to accommodate different connection methods based on the specific requirements of the vehicle or equipment. Manufacturers offer various types of flanges, splines, and other connection options to ensure compatibility with the existing drivetrain components. Customizing the connection methods allows for seamless integration of the cardan shaft into the system.
4. Material Selection:
– Cardan shafts can be manufactured using different materials to suit the specific application requirements. Manufacturers consider factors such as strength, weight, corrosion resistance, and cost when selecting the material for the shaft. Common materials used for cardan shafts include steel alloys, stainless steel, and aluminum. By customizing the material selection, manufacturers can optimize the performance and durability of the shaft.
5. Balancing and Vibration Control:
– Cardan shafts can be customized with balancing techniques to minimize vibration and ensure smooth operation. Manufacturers employ dynamic balancing processes to reduce vibration caused by uneven distribution of mass. Customized balancing ensures that the shaft operates efficiently and minimizes stress on other components.
6. Protective Coatings and Finishes:
– Cardan shafts can be customized with protective coatings and finishes to enhance their resistance to corrosion, wear, and environmental factors. Manufacturers can apply coatings such as zinc plating, powder coating, or specialized coatings to prolong the lifespan of the shaft and ensure its performance in challenging operating conditions.
7. Collaboration with Manufacturers:
– Manufacturers actively engage in collaboration with customers to understand their specific vehicle or equipment requirements. They provide technical support and expertise to customize the cardan shaft accordingly. By collaborating closely with manufacturers, customers can ensure that the cardan shaft is designed and manufactured to meet their precise needs.
Overall, cardan shafts can be customized for specific vehicle or equipment requirements in terms of length, size, torque capacity, connection methods, material selection, balancing, protective coatings, and finishes. By leveraging customization options and working closely with manufacturers, engineers can obtain cardan shafts that are precisely tailored to the application’s needs, ensuring optimal performance, efficiency, and compatibility.
Can you explain the components and structure of a cardan shaft system?
A cardan shaft system, also known as a propeller shaft or drive shaft, consists of several components that work together to transmit torque and rotational power between non-aligned components. The structure of a cardan shaft system typically includes the following components:
1. Shaft Tubes:
– The shaft tubes are the main structural elements of a cardan shaft system. They are cylindrical tubes made of durable and high-strength materials such as steel or aluminum alloy. The shaft tubes provide the backbone of the system and are responsible for transmitting torque and rotational power. They are designed to withstand high loads and torsional forces without deformation or failure.
2. Universal Joints:
– Universal joints, also known as U-joints or Cardan joints, are crucial components of a cardan shaft system. They are used to connect and articulate the shaft tubes, allowing for angular misalignment between the driving and driven components. Universal joints consist of a cross-shaped yoke with needle bearings at each end. The yoke connects the shaft tubes, while the needle bearings enable the rotational motion and flexibility required for misalignment compensation. Universal joints allow the cardan shaft system to transmit torque even when the driving and driven components are not perfectly aligned.
3. Slip Yokes:
– Slip yokes are components used in cardan shaft systems that can accommodate axial misalignment. They are typically located at one or both ends of the shaft tubes and provide a sliding connection between the shaft and the driving or driven component. Slip yokes allow the shaft to adjust its length and compensate for changes in the distance between the components. This feature is particularly useful in applications where the distance between the driving and driven components can vary, such as vehicles with adjustable wheelbases or machinery with variable attachment points.
4. Flanges and Yokes:
– Flanges and yokes are used to connect the cardan shaft system to the driving and driven components. Flanges are typically bolted or welded to the ends of the shaft tubes and provide a secure connection point. They have a flange face with bolt holes that align with the corresponding flange on the driving or driven component. Yokes, on the other hand, are cross-shaped components that connect the universal joints to the flanges. They have holes or grooves that accommodate the needle bearings of the universal joints, allowing for rotational motion and torque transfer.
5. Balancing Weights:
– Balancing weights are used to balance the cardan shaft system and minimize vibrations. As the shaft rotates, imbalances in the mass distribution can lead to vibrations, noise, and reduced performance. Balancing weights are strategically placed along the shaft tubes to counterbalance these imbalances. They redistribute the mass, ensuring that the rotational components of the cardan shaft system are properly balanced. Proper balancing improves stability, reduces wear on bearings and other components, and enhances the overall performance and lifespan of the shaft system.
6. Safety Features:
– Some cardan shaft systems incorporate safety features to protect against mechanical failures. For example, protective guards or shielding may be installed to prevent contact with rotating components, reducing the risk of accidents or injuries. In applications where excessive forces or torques can occur, cardan shaft systems may include safety mechanisms such as shear pins or torque limiters. These features are designed to protect the shaft and other components from damage by shearing or disengaging in case of overload or excessive torque.
In summary, a cardan shaft system consists of shaft tubes, universal joints, slip yokes, flanges, and yokes, as well as balancing weights and safety features. These components work together to transmit torque and rotational power between non-aligned components, allowing for angular and axial misalignment compensation. The structure and components of a cardan shaft system are carefully designed to ensure efficient power transmission, flexibility, durability, and safety in various applications.
editor by CX 2024-02-25
China 12V DC Worm High Torque Self-locking Reversed Mini Turbine Geared Motor for DIY Robot Rotating Table Door Lock Curtain Machine custom drive shaft shop
Error:获取session失败，
Driveshaft structure and vibrations associated with it
The structure of the drive shaft is critical to its efficiency and reliability. Drive shafts typically contain claw couplings, rag joints and universal joints. Other drive shafts have prismatic or splined joints. Learn about the different types of drive shafts and how they work. If you want to know the vibrations associated with them, read on. But first, let’s define what a driveshaft is.
transmission shaft
As the demand on our vehicles continues to increase, so does the demand on our drive systems. Higher CO2 emission standards and stricter emission standards increase the stress on the drive system while improving comfort and shortening the turning radius. These and other negative effects can place significant stress and wear on components, which can lead to driveshaft failure and increase vehicle safety risks. Therefore, the drive shaft must be inspected and replaced regularly.
Depending on your model, you may only need to replace one driveshaft. However, the cost to replace both driveshafts ranges from $650 to $1850. Additionally, you may incur labor costs ranging from $140 to $250. The labor price will depend on your car model and its drivetrain type. In general, however, the cost of replacing a driveshaft ranges from $470 to $1850.
Regionally, the automotive driveshaft market can be divided into four major markets: North America, Europe, Asia Pacific, and Rest of the World. North America is expected to dominate the market, while Europe and Asia Pacific are expected to grow the fastest. Furthermore, the market is expected to grow at the highest rate in the future, driven by economic growth in the Asia Pacific region. Furthermore, most of the vehicles sold globally are produced in these regions.
The most important feature of the driveshaft is to transfer the power of the engine to useful work. Drive shafts are also known as propeller shafts and cardan shafts. In a vehicle, a propshaft transfers torque from the engine, transmission, and differential to the front or rear wheels, or both. Due to the complexity of driveshaft assemblies, they are critical to vehicle safety. In addition to transmitting torque from the engine, they must also compensate for deflection, angular changes and length changes.
type
Different types of drive shafts include helical shafts, gear shafts, worm shafts, planetary shafts and synchronous shafts. Radial protruding pins on the head provide a rotationally secure connection. At least one bearing has a groove extending along its circumferential length that allows the pin to pass through the bearing. There can also be two flanges on each end of the shaft. Depending on the application, the shaft can be installed in the most convenient location to function.
Propeller shafts are usually made of high-quality steel with high specific strength and modulus. However, they can also be made from advanced composite materials such as carbon fiber, Kevlar and fiberglass. Another type of propeller shaft is made of thermoplastic polyamide, which is stiff and has a high strength-to-weight ratio. Both drive shafts and screw shafts are used to drive cars, ships and motorcycles.
Sliding and tubular yokes are common components of drive shafts. By design, their angles must be equal or intersect to provide the correct angle of operation. Unless the working angles are equal, the shaft vibrates twice per revolution, causing torsional vibrations. The best way to avoid this is to make sure the two yokes are properly aligned. Crucially, these components have the same working angle to ensure smooth power flow.
The type of drive shaft varies according to the type of motor. Some are geared, while others are non-geared. In some cases, the drive shaft is fixed and the motor can rotate and steer. Alternatively, a flexible shaft can be used to control the speed and direction of the drive. In some applications where linear power transmission is not possible, flexible shafts are a useful option. For example, flexible shafts can be used in portable devices.
put up
The construction of the drive shaft has many advantages over bare metal. A shaft that is flexible in multiple directions is easier to maintain than a shaft that is rigid in other directions. The shaft body and coupling flange can be made of different materials, and the flange can be made of a different material than the main shaft body. For example, the coupling flange can be made of steel. The main shaft body is preferably flared on at least one end, and the at least one coupling flange includes a first generally frustoconical projection extending into the flared end of the main shaft body.
The normal stiffness of fiber-based shafts is achieved by the orientation of parallel fibers along the length of the shaft. However, the bending stiffness of this shaft is reduced due to the change in fiber orientation. Since the fibers continue to travel in the same direction from the first end to the second end, the reinforcement that increases the torsional stiffness of the shaft is not affected. In contrast, a fiber-based shaft is also flexible because it uses ribs that are approximately 90 degrees from the centerline of the shaft.
In addition to the helical ribs, the drive shaft 100 may also contain reinforcing elements. These reinforcing elements maintain the structural integrity of the shaft. These reinforcing elements are called helical ribs. They have ribs on both the outer and inner surfaces. This is to prevent shaft breakage. These elements can also be shaped to be flexible enough to accommodate some of the forces generated by the drive. Shafts can be designed using these methods and made into worm-like drive shafts.
vibration
The most common cause of drive shaft vibration is improper installation. There are five common types of driveshaft vibration, each related to installation parameters. To prevent this from happening, you should understand what causes these vibrations and how to fix them. The most common types of vibration are listed below. This article describes some common drive shaft vibration solutions. It may also be beneficial to consider the advice of a professional vibration technician for drive shaft vibration control.
If you’re not sure if the problem is the driveshaft or the engine, try turning on the stereo. Thicker carpet kits can also mask vibrations. Nonetheless, you should contact an expert as soon as possible. If vibration persists after vibration-related repairs, the driveshaft needs to be replaced. If the driveshaft is still under warranty, you can repair it yourself.
CV joints are the most common cause of third-order driveshaft vibration. If they are binding or fail, they need to be replaced. Alternatively, your CV joints may just be misaligned. If it is loose, you can check the CV connector. Another common cause of drive shaft vibration is improper assembly. Improper alignment of the yokes on both ends of the shaft can cause them to vibrate.
Incorrect trim height can also cause driveshaft vibration. Correct trim height is necessary to prevent drive shaft wobble. Whether your vehicle is new or old, you can perform some basic fixes to minimize problems. One of these solutions involves balancing the drive shaft. First, use the hose clamps to attach the weights to it. Next, attach an ounce of weight to it and spin it. By doing this, you minimize the frequency of vibration.
cost
The global driveshaft market is expected to exceed (xxx) million USD by 2028, growing at a compound annual growth rate (CAGR) of XX%. Its soaring growth can be attributed to several factors, including increasing urbanization and R&D investments by leading market players. The report also includes an in-depth analysis of key market trends and their impact on the industry. Additionally, the report provides a comprehensive regional analysis of the Driveshaft Market.
The cost of replacing the drive shaft depends on the type of repair required and the cause of the failure. Typical repair costs range from $300 to $750. Rear-wheel drive cars usually cost more. But front-wheel drive vehicles cost less than four-wheel drive vehicles. You may also choose to try repairing the driveshaft yourself. However, it is important to do your research and make sure you have the necessary tools and equipment to perform the job properly.
The report also covers the competitive landscape of the Drive Shafts market. It includes graphical representations, detailed statistics, management policies, and governance components. Additionally, it includes a detailed cost analysis. Additionally, the report presents views on the COVID-19 market and future trends. The report also provides valuable information to help you decide how to compete in your industry. When you buy a report like this, you are adding credibility to your work.
A quality driveshaft can improve your game by ensuring distance from the tee and improving responsiveness. The new material in the shaft construction is lighter, stronger and more responsive than ever before, so it is becoming a key part of the driver. And there are a variety of options to suit any budget. The main factor to consider when buying a shaft is its quality. However, it’s important to note that quality doesn’t come cheap and you should always choose an axle based on what your budget can handle.
editor by Cx 2023-04-26
China factory dc 12v double shaft electric dc worm gear box reduction motor with Best Sales
dc 12v double shaft electric dc worm gear box reduction motor
Product name
Reversible dc 12v double shaft electricApplication:
Auto shutter , blinding machine , automatic TV rack, money counter, spot light, tissue machine, office equippments, household appliances, LC Genuine auto parts U20118W10 535012810 F-556174.01 Alternator Pulley for CZPT Ranger Transit automatic actuatorOriginal
HangZhou,Guang dong province,china
Material
stealMOQ
1 piece
Capacity
2000 pieces/daySample
DependsTransportation
air or by shipPayment
T/T,L/C,Western Union,paypal…
Package
carton package by customizationOur Advantages:
1.Ensure the motors meet the quality standards.
2. Ensure the motors will be delivereied on time.
3.Provide warm and friendly service and after-sale service for motors.
4We will reply you within 24 hours.
5Guaranteed the realible quality and service of motor,you will find that imported directly from us is so easy and simple as you buy from local supplier.Best price and more choose.
The clear view of Reversible dc 12v double shaft electric
The specification of worm gear motor can be customized
Reversible dc 12v double shaft electric dimension drawing
Advantage of Reversible dc 12v double shaft electric
This type is miniature Worm Gear DC Motor, which can change shaft rotation direction while the wiring positive and negative be changed. It’ 100 Ton Industrial Hydraulic Puller Manufacturer High Quality and Low Price s also have addition 2 characteristics: 1.With self-locking, the output shaft can’t rotation when switch off, that is self-locking. 2.Gearbox output shaft and motor shaft are come to be a rectangle, it’s widely used in various of occasions that require special install size.
FAQQ1 Access to motor product information.
Internet:RANSI website contains the latest corporate news and product update.
Email:The use of the motor, purchase, and technical inquiries, Auto Transmission Spare Parts Automotive Parts Drive Shafts For BMW X3(E83) 3165719201 2003-2011 welcome to contact.
Q2 Are you the gear motor manufacturer?
Yes. We have our own factory and sales company, passed the onsite check by alibaba.
Q3 What is the main product of your company?
The main products are brushed motor brushless motor and stepped motor with or without gear box, DC/AC gear motor, planetary gear motor, DC micro motor , Stepper motor,
stepper gear motor, linear step motor
Q4 Do you have the best price?Not best price, Drive Shaft Center Support Bearing for CZPT HB88107HB88512 only the right price with right motor.
Q5 Gear motor products can be customized?
Yes, the general situation can be customized. We offer OEM service.
Q6 How do I place an order?
You can email us, or the Credit gurrante of Alibaba online orders. We will discuss and confirm the order details together.
Company Information
Contact us
Worm Shafts and Gearboxes
If you have a gearbox, you may be wondering what the best Worm Shaft is for your application. There are several things to consider, including the Concave shape, Number of threads, and Lubrication. This article will explain each factor and help you choose the right Worm Shaft for your gearbox. There are many options available on the market, so don’t hesitate to shop around. If you are new to the world of gearboxes, read on to learn more about this popular type of gearbox.
Concave shape
The geometry of a worm gear varies considerably depending on its manufacturer and its intended use. Early worms had a basic profile that resembled a screw thread and could be chased on a lathe. Later, tools with a straight sided g-angle were developed to produce threads that were parallel to the worm’s axis. Grinding was also developed to improve the finish of worm threads and minimize distortions that occur with hardening.
To select a worm with the proper geometry, the diameter of the worm gear must be in the same unit as the worm’s shaft. Once the basic profile of the worm gear is determined, the worm gear teeth can be specified. The calculation also involves an angle for the worm shaft to prevent it from overheating. The angle of the worm shaft should be as close to the vertical axis as possible.
Double-enveloping worm gears, on the other hand, do not have a throat around the worm. They are helical gears with a straight worm shaft. Since the teeth of the worm are in contact with each other, they produce significant friction. Unlike double-enveloping worm gears, non-throated worm gears are more compact and can handle smaller loads. They are also easy to manufacture.
The worm gears of different manufacturers offer many advantages. For instance, worm gears are one of the most efficient ways to increase torque, while lower-quality materials like bronze are difficult to lubricate. Worm gears also have a low failure rate because they allow for considerable leeway in the design process. Despite the differences between the two standards, the overall performance of a worm gear system is the same.
The cone-shaped worm is another type. This is a technological scheme that combines a straight worm shaft with a concave arc. The concave arc is also a useful utility model. Worms with this shape have more than three contacts at the same time, which means they can reduce a large diameter without excessive wear. It is also a relatively low-cost model.
Thread pattern
A good worm gear requires a perfect thread pattern. There are a few key parameters that determine how good a thread pattern is. Firstly, the threading pattern must be ACME-threaded. If this is not possible, the thread must be made with straight sides. Then, the linear pitch of the “worm” must be the same as the circular pitch of the corresponding worm wheel. In simple terms, this means the pitch of the “worm” is the same as the circular pitch of the worm wheel. A quick-change gearbox is usually used with this type of worm gear. Alternatively, lead-screw change gears are used instead of a quick-change gear box. The pitch of a worm gear equals the helix angle of a screw.
A worm gear’s axial pitch must match the circular pitch of a gear with a higher axial pitch. The circular pitch is the distance between the points of teeth on the worm, while the axial pitch is the distance between the worm’s teeth. Another factor is the worm’s lead angle. The angle between the pitch cylinder and worm shaft is called its lead angle, and the higher the lead angle, the greater the efficiency of a gear.
Worm gear tooth geometry varies depending on the manufacturer and intended use. In early worms, threading resembled the thread on a screw, and was easily chased using a lathe. Later, grinding improved worm thread finishes and minimized distortions from hardening. As a result, today, most worm gears have a thread pattern corresponding to their size. When selecting a worm gear, make sure to check for the number of threads before purchasing it.
A worm gear’s threading is crucial in its operation. Worm teeth are typically cylindrical, and are arranged in a pattern similar to screw or nut threads. Worm teeth are often formed on an axis of perpendicular compared to their parallel counterparts. Because of this, they have greater torque than their spur gear counterparts. Moreover, the gearing has a low output speed and high torque.
Number of threads
Different types of worm gears use different numbers of threads on their planetary gears. A single threaded worm gear should not be used with a double-threaded worm. A single-threaded worm gear should be used with a single-threaded worm. Single-threaded worms are more effective for speed reduction than double-threaded ones.
The number of threads on a worm’s shaft is a ratio that compares the pitch diameter and number of teeth. In general, worms have 1,2,4 threads, but some have three, five, or six. Counting thread starts can help you determine the number of threads on a worm. A single-threaded worm has fewer threads than a multiple-threaded worm, but a multi-threaded worm will have more threads than a mono-threaded planetary gear.
To measure the number of threads on a worm shaft, a small fixture with two ground faces is used. The worm must be removed from its housing so that the finished thread area can be inspected. After identifying the number of threads, simple measurements of the worm’s outside diameter and thread depth are taken. Once the worm has been accounted for, a cast of the tooth space is made using epoxy material. The casting is moulded between the two tooth flanks. The V-block fixture rests against the outside diameter of the worm.
The circular pitch of a worm and its axial pitch must match the circular pitch of a larger gear. The axial pitch of a worm is the distance between the points of the teeth on a worm’s pitch diameter. The lead of a thread is the distance a thread travels in one revolution. The lead angle is the tangent to the helix of a thread on a cylinder.
The worm gear’s speed transmission ratio is based on the number of threads. A worm gear with a high ratio can be easily reduced in one step by using a set of worm gears. However, a multi-thread worm will have more than two threads. The worm gear is also more efficient than single-threaded gears. And a worm gear with a high ratio will allow the motor to be used in a variety of applications.
Lubrication
The lubrication of a worm gear is particularly challenging, due to its friction and high sliding contact force. Fortunately, there are several options for lubricants, such as compounded oils. Compounded oils are mineral-based lubricants formulated with 10 percent or more fatty acid, rust and oxidation inhibitors, and other additives. This combination results in improved lubricity, reduced friction, and lower sliding wear.
When choosing a lubricant for a worm shaft, make sure the product’s viscosity is right for the type of gearing used. A low viscosity will make the gearbox difficult to actuate and rotate. Worm gears also undergo a greater sliding motion than rolling motion, so grease must be able to migrate evenly throughout the gearbox. Repeated sliding motions will push the grease away from the contact zone.
Another consideration is the backlash of the gears. Worm gears have high gear ratios, sometimes 300:1. This is important for power applications, but is at the same time inefficient. Worm gears can generate heat during the sliding motion, so a high-quality lubricant is essential. This type of lubricant will reduce heat and ensure optimal performance. The following tips will help you choose the right lubricant for your worm gear.
In low-speed applications, a grease lubricant may be sufficient. In higher-speed applications, it’s best to apply a synthetic lubricant to prevent premature failure and tooth wear. In both cases, lubricant choice depends on the tangential and rotational speed. It is important to follow manufacturer’s guidelines regarding the choice of lubricant. But remember that lubricant choice is not an easy task.
China Good quality 120 Cheap Price Can Be Custom Small Worm Gear Shaft Gearbox Motor Speed Reducer with Hot selling
Products Display Specification ModelSeriesReduction ratioRated output torque (Nm)Output maximum torque (Nm)Rated input speed (rpm)120I32304603000423046 0571 0460623046 0571 937 0571 937571032571160320 Enter the maximum speed (rpm)Allowable radial load (N)Allowable Axial Load (N)Maximum radial load (N)Maximum axial load (N)Backlash (arcmin)Moment of inertia≤Φ1460004200560 0571 07800≤55.3420056004.1420056003.6420056003.3420056003.2420056003.14200560571056003 Related Product Company Profile Certifications Why Choose Us Packing And Shipping FAQ Q1: Are you a trading company or manufacturer?A1: We are an experienced manufacturer. Q2: Can I have my own customized product?A2: Yes.OEM& WeiYou Hd700-7 Hd1250-7 Hd1430 Reduction Gearbox Part 1st 2nd 3rd Travel Planetary Carrier Ass’Y Sun Gear Shaft For CZPT ODM are available,including design, logo,package etc. Q3: What’ Wholesale Golf Shaft Adapter Sleeve .335 Tip CZPT made Driver Fairway RH Compatible with M1 M2 M3 M4 M5 M6 SIM SIM2 R15 Drive s the MOQ?A3: For inventory,the MOQ is 1set. Q4: What’s the delivery time?A4: Within 10 days for ready stock order.OEM&ODM order.The exact time depends on actual situation.
Worm Shafts and Gearboxes
If you have a gearbox, you may be wondering what the best Worm Shaft is for your application. There are several things to consider, including the Concave shape, Number of threads, and Lubrication. This article will explain each factor and help you choose the right Worm Shaft for your gearbox. There are many options available on the market, so don’t hesitate to shop around. If you are new to the world of gearboxes, read on to learn more about this popular type of gearbox.
Concave shape
The geometry of a worm gear varies considerably depending on its manufacturer and its intended use. Early worms had a basic profile that resembled a screw thread and could be chased on a lathe. Later, tools with a straight sided g-angle were developed to produce threads that were parallel to the worm’s axis. Grinding was also developed to improve the finish of worm threads and minimize distortions that occur with hardening.
To select a worm with the proper geometry, the diameter of the worm gear must be in the same unit as the worm’s shaft. Once the basic profile of the worm gear is determined, the worm gear teeth can be specified. The calculation also involves an angle for the worm shaft to prevent it from overheating. The angle of the worm shaft should be as close to the vertical axis as possible.
Double-enveloping worm gears, on the other hand, do not have a throat around the worm. They are helical gears with a straight worm shaft. Since the teeth of the worm are in contact with each other, they produce significant friction. Unlike double-enveloping worm gears, non-throated worm gears are more compact and can handle smaller loads. They are also easy to manufacture.
The worm gears of different manufacturers offer many advantages. For instance, worm gears are one of the most efficient ways to increase torque, while lower-quality materials like bronze are difficult to lubricate. Worm gears also have a low failure rate because they allow for considerable leeway in the design process. Despite the differences between the two standards, the overall performance of a worm gear system is the same.
The cone-shaped worm is another type. This is a technological scheme that combines a straight worm shaft with a concave arc. The concave arc is also a useful utility model. Worms with this shape have more than three contacts at the same time, which means they can reduce a large diameter without excessive wear. It is also a relatively low-cost model.
Thread pattern
A good worm gear requires a perfect thread pattern. There are a few key parameters that determine how good a thread pattern is. Firstly, the threading pattern must be ACME-threaded. If this is not possible, the thread must be made with straight sides. Then, the linear pitch of the “worm” must be the same as the circular pitch of the corresponding worm wheel. In simple terms, this means the pitch of the “worm” is the same as the circular pitch of the worm wheel. A quick-change gearbox is usually used with this type of worm gear. Alternatively, lead-screw change gears are used instead of a quick-change gear box. The pitch of a worm gear equals the helix angle of a screw.
A worm gear’s axial pitch must match the circular pitch of a gear with a higher axial pitch. The circular pitch is the distance between the points of teeth on the worm, while the axial pitch is the distance between the worm’s teeth. Another factor is the worm’s lead angle. The angle between the pitch cylinder and worm shaft is called its lead angle, and the higher the lead angle, the greater the efficiency of a gear.
Worm gear tooth geometry varies depending on the manufacturer and intended use. In early worms, threading resembled the thread on a screw, and was easily chased using a lathe. Later, grinding improved worm thread finishes and minimized distortions from hardening. As a result, today, most worm gears have a thread pattern corresponding to their size. When selecting a worm gear, make sure to check for the number of threads before purchasing it.
A worm gear’s threading is crucial in its operation. Worm teeth are typically cylindrical, and are arranged in a pattern similar to screw or nut threads. Worm teeth are often formed on an axis of perpendicular compared to their parallel counterparts. Because of this, they have greater torque than their spur gear counterparts. Moreover, the gearing has a low output speed and high torque.
Number of threads
Different types of worm gears use different numbers of threads on their planetary gears. A single threaded worm gear should not be used with a double-threaded worm. A single-threaded worm gear should be used with a single-threaded worm. Single-threaded worms are more effective for speed reduction than double-threaded ones.
The number of threads on a worm’s shaft is a ratio that compares the pitch diameter and number of teeth. In general, worms have 1,2,4 threads, but some have three, five, or six. Counting thread starts can help you determine the number of threads on a worm. A single-threaded worm has fewer threads than a multiple-threaded worm, but a multi-threaded worm will have more threads than a mono-threaded planetary gear.
To measure the number of threads on a worm shaft, a small fixture with two ground faces is used. The worm must be removed from its housing so that the finished thread area can be inspected. After identifying the number of threads, simple measurements of the worm’s outside diameter and thread depth are taken. Once the worm has been accounted for, a cast of the tooth space is made using epoxy material. The casting is moulded between the two tooth flanks. The V-block fixture rests against the outside diameter of the worm.
The circular pitch of a worm and its axial pitch must match the circular pitch of a larger gear. The axial pitch of a worm is the distance between the points of the teeth on a worm’s pitch diameter. The lead of a thread is the distance a thread travels in one revolution. The lead angle is the tangent to the helix of a thread on a cylinder.
The worm gear’s speed transmission ratio is based on the number of threads. A worm gear with a high ratio can be easily reduced in one step by using a set of worm gears. However, a multi-thread worm will have more than two threads. The worm gear is also more efficient than single-threaded gears. And a worm gear with a high ratio will allow the motor to be used in a variety of applications.
Lubrication
The lubrication of a worm gear is particularly challenging, due to its friction and high sliding contact force. Fortunately, there are several options for lubricants, such as compounded oils. Compounded oils are mineral-based lubricants formulated with 10 percent or more fatty acid, rust and oxidation inhibitors, and other additives. This combination results in improved lubricity, reduced friction, and lower sliding wear.
When choosing a lubricant for a worm shaft, make sure the product’s viscosity is right for the type of gearing used. A low viscosity will make the gearbox difficult to actuate and rotate. Worm gears also undergo a greater sliding motion than rolling motion, so grease must be able to migrate evenly throughout the gearbox. Repeated sliding motions will push the grease away from the contact zone.
Another consideration is the backlash of the gears. Worm gears have high gear ratios, sometimes 300:1. This is important for power applications, but is at the same time inefficient. Worm gears can generate heat during the sliding motion, so a high-quality lubricant is essential. This type of lubricant will reduce heat and ensure optimal performance. The following tips will help you choose the right lubricant for your worm gear.
In low-speed applications, a grease lubricant may be sufficient. In higher-speed applications, it’s best to apply a synthetic lubricant to prevent premature failure and tooth wear. In both cases, lubricant choice depends on the tangential and rotational speed. It is important to follow manufacturer’s guidelines regarding the choice of lubricant. But remember that lubricant choice is not an easy task.
R helical worm reducer manufacturer made in China – replacement parts – in Nairobi Kenya Series Helical Flange Mounted Gearbox Electric Motor Speed Reducer with top quality
We – EPG Team the most significant worm gearbox, couplings and gears factory in China with 5 various branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
Solution Description:
ept Sequence gear motor is the generate goods with intercontinental superior degree.which includes R series Helical geared motor, F series Parallel shaft-Helical geared motor, K series Helical-Beval geared motor,S collection Helical-Worm.
ept series items comply with Motor the philosophy of modularization and optimization, adopt finite factor investigation strategy and distinctive
reduced sounds technologies in developing equipment ,to insure advanced design.The classi fication of ratio is so acurate that.
Our corpotation also supplies other item options this sort of as combined geared motor,shrink disk,spline hollow shaft, B14 flange,you should check with our firm for further data.
| Housing substance | Forged iron/Ductile iron |
| Housing hardness | HBS190-240 |
| Equipment material | 20CrMnTi alloy metal |
| Area hardness of gears | HRC58°~62 ° |
| Equipment core hardness | HRC33~forty |
| Input / Output shaft substance | 42CrMo alloy steel |
| Enter / Output shaft hardness | HRC25~thirty |
| Machining precision of gears | accurate grinding, 6~5 Grade |
| Lubricating oil | GB L-CKC220-460, Shell Omala220-460 |
| Heat treatment | tempering, cementiting, quenching, and so on. |
| Performance | 94%~ninety six% (is dependent on the transmission phase) |
| Sounds (MAX) | 60~68dB |
| Temp. rise (MAX) | 40°C |
| Temp. increase (Oil)(MAX) | 50°C |
| Vibration | ≤20µm |
| Backlash | ≤20Arcmin |
| Manufacturer of bearings | China best brand name bearing, HRB/LYC/ZWZ/C&U. Or other manufacturers asked for, SKF, NSK. |
| Model of oil seal | NAK — ZheJiang or other brands asked for |
Helical speed reducer much more particulars:
Our factory and in stock :
Application location:
Plywood pac ept and International transport :
FAQ
Q1: Are you ept business or maker ?
A: We are a manufacturer in ZheJiang China.welcome to our manufacturing facility to have a visit.
Q2: How we select models and specifications?
A:You can e-mail us the series title & code (for instance: WJ sequence worm reducer) as properly as need particulars, this sort of as motor power, output speed or ratio, services aspect or your application…as a lot information as attainable. If you can supply some images or drawings, it is far better.
Q3: How is your cost? Can you offer any discount?
A: Within 12 hours.
Q4: How prolonged must I wait for the suggestions right after I send the enquiry?
Semi-Computerized PET Bottle Blowing Equipment Bottle Ma ept Equipment Bottle Moulding Equipment
PET Bottle Ma ept Equipment is suited for making PET plastic containers and bottles in all styles.
It is broadly utilised to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, extensive-mouth bottle and sizzling fill bottle and so forth.
Beverage bottle, cosmetic bottle, drugs bottle, jar etc.
Lorem Ipsum is merely dummy text of the printing and typesetting market. Lorem Ipsum has been the industry’s standard dummy text ever because the 1500s, when an mysterious printer took a galley of type and scrambled it to make a type specimen guide.
Q5: What is your product guarantee period of time?
A:We offer you 1 yr guarantee considering that the vessel departure day remaining China.
Q6: What industries are your gearboxes getting utilized?
A:Our gearboxes are extensively used to metallurgical gear, mining products, automation gear, foods equipment, packaging products, tobacco gear and so on.
If you are intrigued, could you please tell me your make contact with info? I can deliver you the parameters and particulars of this gear box for your reference.
/ The use of unique products manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the detailed substitution parts contained herein are not sponsored, approved, or produced by the OEM. /
AC wholesaler made in China – replacement parts – in Malegaon India Reversible Gear Motor with Worm Gearbox 90mm 90W Ratio 75×3.9 with top quality
We – EPG Group the largest gearbox & motors , couplings and gears manufacturing facility in China with 5 different branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
| Gear Motor | ||||||||||||
| AC Equipment Motor | five | RK | 90 | R | C | S | F | |||||
| Outer Diameter | Motor Variety | Energy Capacity | Velocity Motor | Output Shaft Condition | Votalge | Accessories | ||||||
| 5 – 90mm | IK – Induction RK – Reversible |
ninety – 90W one hundred twenty – 120W |
R Speed Management |
A – Shaft C – Toothed Shaft |
A – 110V 1 Phase 110V S – 220V 3 Section 220V |
F – Fan | ||||||
| Gearbox | ||||||||||||
| Worm Gearbox | GRV | 050 | twenty | 90 | ||||||||
| Motor Kind | Diameter | Equipment Ratio | Go over Product | |||||||||
| GRV – Worm Geared Motor | 050 063 |
20 – 1:20 | 90 – 90 x 90mm | |||||||||
| Standard Overall performance Parameters | ||||
| Motor Design | 5RK90CC·F | Gearbox Model | GRV050-75×3.9-ninety | |
| Rated Voltage | AC220V | Ratio | 292.five | |
| Rated Frequency | 50Hz | |||
| Capacitor | 6uF | |||
| Rated Electrical power | 90W | Number of Reduction | 2 | |
| Rated Present | 1A | |||
| Rated Speed | 1300rpm | |||
| Rated Torque | .66N.m | Output Torque | 135N.m | |
| No-Load Velocity | 1480rpm | |||
| Variety of Poles | 4P | |||
| Electric Strength | S1 | Transmission Performance | 0.7 | |
| Responsibility Cycle | >50MΩ | |||
| Insulation Resistance | 1800V/S | |||
| Insulation Quality | E | Noise | <55dB(L=1m) | |
| Security Quality | IP44 | |||
| Atmosphere Temperature | -10ºC-40ºC | The Increase and Tumble Time | 1.6s | |
| Humidity | Relative humidity beneath 95ºC | |||
Taibang Motor Industrial Team Co., Ltd. is a specialist manufacturer which merged with series gear transmission goods of layout, manufacture, and sale marketing.
• occupied more than 30,000 square meters, had a lot more than 1000 workers, and far more than 200 sets of sophisticated tools,
• operated strictly in accordance to ISO9000 High quality administration method.
• supply you with more than just large-efficiency items, much more ept customers customized package deal of application options,
• primarily based on corporate problems, to offer customers with the most suited products, the most ideal solution.
• Lead customer innovation through the items and provider, support the customer realize the maximum reward.
• 1995: Taibang Company and the Ministry of Aerospace, Pe ept College,
and scientific analysis authorities jointly established a micro-micro motor manufacturing business
• 2000: Taibang recognized a department in HangZhou, ZHangZhoug
• 2005: ZHangZhoug Taibang Motor ept Co., Ltd. proven HangZhou ZheJiang Point out-owned Industrial Co., Ltd.
• 2012: Recognized ZheJiang Taibang Car Co., Ltd.
• 2014: Authorized the new factory site of the next section of the HangZhou Nationwide Economic Park in ZHangZhoug Province,
which is envisioned to be completed and set into operation in 2018
• 2018: A new one hundred twenty,000 sq. meters automatic production base
The use of unique equipment manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our company and the shown replacement elements contained herein are not sponsored, accepted, or produced by the OEM.
Mobile 5hp induction motor price wholesaler made in China – replacement parts – in Sao Jose dos Campos Brazil Phone Camera Small Stepper Worm Gear Motor with top quality
We – EPG Group the greatest worm gearbox, couplings and gears factory in China with 5 different branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
Mobile Phone Digicam Modest Stepper Worm Gear Motor
Merchandise Description
1)Specification
Product: ZWPD006006-700
Rated Voltage: 3.0v
No Load Speed: 102 rpm
No Load Current: 90 mA
Rated Load Speed: 40 rpm
Rated Load Current: 100 mA
Rated Load Torque: 60 gf.cm
Rated Torque of Equipment Box: sixty gf.cm
Instant Torque of Equipment Box: one hundred twenty gf.cm
General Length L: 21.05 mm
Gear Box Size L1: 11.seventy five mm
| Design | Application Parameters | Rated Torque of Equipment Box | Instant Torque of Gear Box | Gear Ratio | Gear Box Length L1 |
|||||||
| Rated | At No Load | At Rated Load | Overall Length L |
|||||||||
| Voltage | Speed | Recent | Velocity | Existing | Torque | |||||||
| VDC | rpm | mA | rpm | mA | gf.cm | mN.m | mm | gf.cm | gf.cm | mm | ||
| ZWPD006006-seven-hundred | 3. | forty six | 60 | 40 | one hundred | sixty | 5.88 | 21.05 | sixty | 120 | seven hundred | eleven.seventy five |
previously mentioned technical specs just for reference and customizable according to demands.
2)Application
|
Audio and visible equipments |
notebook Personal computer, camcorder, automobile DVD, kinescope DVD, vehicle CD player, camera, electronic digital camera, headphone stereo, cassette tape recorder and etc. |
|
Home software |
electric shaver, tooth brush, kit ept appliances, hair clipper, sewing devices, massager, vibrator, hair dryer, rubdown device, corn popper, scissor hair machine, vacuum cleaner, backyard resource, sanitary ware, window curtain, coffee machine, whisk and etc. |
|
Office automation equipments |
CD-ROM, OA equipments, scanners, printers, multifunction machines duplicate equipment, fax, FAX 13083988828 paper cutter, pc peripheral, lender machine and and so forth. |
|
Automotive products |
conditioning damper actuator, door lock actuator, retractable rearview mirror, meters, optic axis handle system, head light beam degree adjuster, auto drinking water pump, auto antenna, lumbar help, automatic vending machine and and many others. |
|
Toys and versions |
radio manage product, automated cruise management, journey-on toy and and many others. |
|
Health care software |
blood force meter, breath machine and and so forth. |
|
Industrials |
air freshener, display, circulation management valves and etc. |
|
Electrical energy equipment |
electric powered drill, screwdriver and and so forth. |
|
Precision instruments |
monitor, optics instruments and and so on. |
Our Providers:
- ODM & OEM
- Gearbox style and improvement
- Relevant technology assist
Packaging & Shipping
1) Pac ept Particulars
packed in nylon first of all, then carton, and then bolstered with wood circumstance for outer packing.
Or according to client’s necessity.
2) Shipping Information
samples will be shipped in 10 days
batch purchase major time in accordance to the genuine circumstance.
Business Info:
HangZhou ept Equipment & Electronics Co., Ltd was established in 2001,We provide the complete drive solution for clients from style, tooling fabrication, factors production and assembly.
1) Aggressive Positive aspects
- one) Competitive Benefits
17+calendar year encounter in producing motor gearbox
We provide technological support from r&d, prototype, screening, assembly and serial production , ODM &OEM
Competitive Price
Product Overall performance: Low sound, Higher performance, Long lifespan
Prompt Supply: 15 wor ept days soon after payment
Little Orders Approved
2) Main Items
-
Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,electricity: .01-40W,output velocity:5-2000rpm and output torque:1. gf.cm -50kgf.cm,
- Customized worm and gear transmission machinery
- Precise electromechanical motion module
- Specific component and assembly of plastic and metallic powder injection.
Certifications
We Have passed to keep ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).
and far more…
FAQ
1. Can you make the gearbox with personalized requirements?
Sure. We have design and style and growth staff, also a fantastic time period of engineers, every of them have
numerous function years experience.
two.Do you give the samples?
Of course. Our organization can supply the samples to you, and the delivery time is about 5-15days in accordance to the specification of gearbox you need.
three.What is your MOQ?
Our MOQ is 2000pcs. But at the starting of our enterprise, we settle for tiny buy.
4. Do you have the item in stock?
I am sorry we donot have the product in stock, All items are created with orders.
5. Do you give technologies help?
Indeed. Our company have design and style and growth staff, we can offer engineering assist if you
need.
six.How to ship to us?
We will ship the items to you in accordance to the DHL or UPS or FEDEX and so forth account you supply.
7.How to spend the cash?
We take T/T in advance. Also we have various lender account for getting money, like US dollors or RMB and so on.
eight. How can I know the item is suitable for me?
Frist, you want to offer us the more information information about the item. We will advocate the merchandise to you according to your necessity of specification. Right after you validate, we will prepare the samples to you. also we will offer you some great advances according to your item use.
9. Can I come to your organization to pay a visit to?
Yes, you can come to our business to pay a visit to at at any time, and welcome to pay a visit to our organization.
10. How do speak to us ?
Please send an inquiry
/ The use of original gear manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our business and the outlined substitute elements contained herein are not sponsored, accepted, or made by the OEM. /
Big haldex hydraulic gear motor wholesaler made in China – replacement parts – in Matola Mozambique Powr High Torque DC Worm Gear Motor for Automatic Application with top quality
We – EPG Group the most significant worm gearbox, couplings and gears manufacturing unit in China with 5 diverse branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
huge powr higher torque dc worm gear motor for Automatic Application (76ZYT-WOG)
one.Product Description
one.size:Diameter 76mm
2.lifestyle time:5000 hours
three.material:copper or plastic
76mm diameter higher top quality 12V DC WORM Equipment MOTOR
Application:
welding device, electrical family, diamond equipment, office clever equipment, resort leisure, antomated equipment and so on.
Motor Voltage: DC12V, 24V,42V,48V,90V,110V ,300V
Motor Rated Electrical power:15W, 25W,30W,45W,65W, 95W,120W,50W,180W
Motor no-load Pace:15RPM, 30RPM,60RPM,80RM,120RPM,150RPM,180RPM,200RPM,220RPM.
|
Product |
VOTAGE (V) |
Energy (W) |
NO-LOAD Velocity (RPM) |
LOAD Pace (RPM) |
LOAD Existing (A) |
LOAD TORQUE (N.M) |
RATIO |
MOTOR Duration (MM) |
|
76ZYT |
24 |
60 |
30±3 |
26±3 |
≤3.5 |
≥4.five |
1:seventy five |
77 |
|
76ZYT |
24 |
sixty |
50±2 |
45±3 |
≤3.five |
≥4.5 |
1:60 |
seventy seven |
|
76ZYT |
forty eight |
60 |
75±3 |
70±3 |
≤3.5 |
≥5.2 |
1:sixty |
77 |
|
76ZYT |
twelve |
80 |
50±3 |
42±3 |
≤4.five |
≥5. |
1:sixty |
eighty five |
|
76ZYT |
24 |
eighty |
65±3 |
62±3 |
≤4.five |
≥5.2 |
1:sixty |
85 |
|
76ZYT |
12 |
forty five |
150±5 |
130±5 |
≤3.5 |
≥3.three |
one:twenty |
77 |
|
76ZYT |
24 |
forty five |
180±5 |
150±5 |
≤4.5 |
≥4.5 |
1:20 |
77 |
|
76ZYT |
forty eight |
45 |
220±5 |
180±5 |
≤6.five |
≥6. |
1:20 |
77 |
|
76ZYT |
24 |
65 |
200±5 |
160±5 |
≤4.5 |
≥4.five |
1:20 |
eighty five |
|
76ZYT |
24 |
65 |
220±5 |
180±5 |
≤6.five |
≥6. |
1:twenty |
eighty five |
|
76ZYT |
24 |
95 |
180±5 |
150±5 |
≤4.five |
≥4.5 |
1:twenty |
97 |
|
76ZYT |
24 |
95 |
220±5 |
180±5 |
≤6.five |
≥6. |
1:20 |
97 |
two.Manufacturing Movement
3.Organization Data
In recent 10 a long time, ept has been focused to the manufacture of the motor items and the main items can be categorised into the pursuing collection, particularly DC motor, DC equipment motor, AC motor, AC equipment motor, Stepper motor, Stepper equipment motor, Servo motor and Linear actuator sequence.
Our motor merchandise are widely applied in the fields of aerospace industry, automotive market, monetary products, household appliance, industrial automation and robotics, health-related tools, place of work tools, pac ept machinery and transmission market, giving buyers dependable customized remedies for driving and controlling.
four.Our Solutions
1). Standard Provider:
|
Swift Reply |
All enquiry or e mail be replied in 12 hours, no delay for your company. |
|
Professional Group |
Queries about merchandise will be replied professionally, specifically, ideal guidance to you. |
|
Quick Guide time |
Sample or modest order despatched in 7-fifteen days, bulk or custom-made get about thirty times. |
|
Payment Option |
T/T, Western Union,, L/C, etc, easy for your enterprise. |
|
Before shipment |
Consider pictures, deliver to buyers for confirmation. Only confirmed, can be shipped out. |
|
Language Option |
Besides English, you can use your personal language by email, then we can translate it. |
2). Customization Service:
Motor specification(no-load velocity , voltage, torque , diameter, noise, lifestyle, testing) and shaft length can be tailor-made in accordance to customer’s demands.
five.Package deal & Shipping
/ The use of original products manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our business and the shown substitute parts contained herein are not sponsored, accredited, or manufactured by the OEM. /
Worm 3hp induction motor price near me made in China – replacement parts – in Bordeaux France Gearbox Ceiling T Bar Machine with top quality
We – EPG Group the greatest worm gearbox, couplings and gears manufacturing unit in China with 5 different branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
KaiGui Machinery is NO.1 and just focusing on Suspension Ceiling T Bar/T Grid Roll Forming Machinery
Roller and Mould/Die Material and Processing and Heat therapy we do by our own
Electric powered manage Cupboard and PLC by our very own Electrical engineer with Exceptional Functionality
The Most Computerized, Superior and Fast Velocity while Steady functionality
Totally Automated Non-quit Flying Reducing off
Worm Gearbox Reducer Transmission
Stitching Mould and Patented Steel head Clip Lock Continous Mould
Ideal service and Substantial regular QC
Hearth-evidence Gap and Custmer’s Brand on T Bar
Life span QWP (fast weary elements) assist and Engineering up grade support.
Merchandise dimensions: H*W(MM)38×35 38×24 38×15 32×24 32×15 28×24 28×15 and so on. Duration: 3600/3660mm
Any size and any demand we can do as per customer’s drawing or sample.
⊙ Principal Parts(A—-F):
A(2 Uncoilers for GI& PPGI) + B(Main Device Roll Previous) + C(Computerized Punching& Cutting-off System) +D(Electric PLC management Cupboard) + E(2 Hydraulic standions) + F(Operate-out Table)
⊙ Main Parameter:
Stations: eighteen-24 Stations
Speed: twenty–25M/Min(6–7Pcs/Min)
Complete Energy: 21.2KW(4KW+2.2KW+15KW)
PLC model: Siemens
Xihu (West Lake) Dis.n-Equipment interface: Siemens
Installation duration: 14.8M
Die/Mould Content: SKD11
Customer’s Emblem: Okay
Anti-Hearth Gap: Okay
Stitching Line: Ok
Steel Head Lock: Ok
Transmission: Worm Gearbox Reducer
Main Hydraulic station with Accumulator for secure and precise functionality
A: Uncoiler/Decoiler/Coil Opener/Raw Materials Shelf:
Code: MT-two hundred
Bodyweight: 100kg
Size: a thousand*800*1100(mm)
Uncooked Materials Roll :
Inner Diameter: 450-530mm
Outer Diameter: 1200mm
Loading weight: 1000kg
Make positive the GI and PPGI
Unoiler in the actual line with
Primary Former Machine
☆ Station/Move/Pinion: 18 stations
☆ Speed: twenty—25M/Min(6–7Pcs/Min)
☆ Machine body: Carbon Steel, Thickness 20mm, Polished, Rust Prevention Paint Safety,Any coloration available
☆ Transmission: Motor 4KW, Principal Transmission: Chain Generate, In between Rollers: Worm wheel Gearbox
☆ Sew: Four Rollers true sew, can also be employed for bogus sew.
☆ Facet plate: Thickness 30mm, Polish 6 sides, large precision boring
☆ Principal Axis: 45# metal, tempering warmth therapy, mill grinder exact making
☆ Electric Cabinet: SIENENS PLC programmed, Touch Monitor, Completely Automatic controlling method.
☆ Punching Die: Content D11, Hardness HRC 58-sixty, Specific milled, specific producing, simple to detachable parts.
Stitching System
☆ Roller: Material Cr12 Inner diameter 39mm, Min OD 90mm, HRC fifty five-fifty six, Symmetry in the range of .05mm
C Computerized Punching and Flying Slicing-off Method:
Attributes:
☆ Punching Die: 24 sets( 2 head locks 22 Major Tee holes)
☆ Anti-Fireplace Hole Die Obtainable on Machine
☆ Cutting: Flying Cutting-Off Contineous wor ept non-quit
☆ Driving Power: 2 Hydraulic stations one for Punching system vacation and one particular for punching
☆ Accurancy: Peak and Width inside .1mm In Duration .3mm/Meter
☆ Die Substance: 45# steel and Cr12MoV, Heat remedy Vacuum 58–60HRC
☆ Reducing off Length: 3600 or 3660mm
☆ Gap Length: 150cm or 6″
☆ Personalized Emblem Punching at very same time on Machine Entirely Automated
D Electric PLC control Cabinet
Functions:
☆ PLC brand name: SIEMENS
☆ Xihu (West Lake) Dis.n-Equipment Interface: SIEMENS
☆ Inverter: Teco ZheJiang brand
☆ Swap Energy: Delta ZheJiang brand name
☆ Wire link interface: Aviation plug
E Hydraulic stations
Functions:
☆ Hydraulic brand name: LYHP
☆ Electromagnetic valve: XIHU (WEST LAKE) DIS. model
☆ Accumulator: Nitrogen
☆ Principal Hydraulic: 15KW
☆ Secondary Hydraulic: 2.2KW
☆ Color: Any colour offered
F Run-out Table
Features:
Size: 3800x750x970mm
Complete: polish
Materials: Stainless Steel 304 the outward surface painted defense, Any shade accessible
This compenent is wor ept desk. Solution will drop onto the desk and slide out efficiently, so it avoids scratching and straightforward for packing. And there are squander grooves update to conduct the waste metal odd ends to the barrel.
/ The use of original products manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our business and the listed substitution elements contained herein are not sponsored, accepted, or produced by the OEM. /
Shaft 6v 250 rpm plastik redüktörlü dc motor manufacturer made in China – replacement parts – in Mar Del Plata Argentina Helical Bevel Reducer Worm Gearbox China Manufacturer Industrial Replacement with top quality
We – EPG Team the greatest worm gearbox, couplings and gears manufacturing facility in China with 5 distinct branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
shaft helical bevel reducer worm gearbox china manufacturer industrial replacement
/ The use of first tools manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our company and the shown alternative components contained herein are not sponsored, authorized, or made by the OEM. /